Good Price 100Mbps Electrical FE Copper RJ45 Module 100meters compatible with Cisco

Description

NuFiber’s 100BASE-T copper SFP transceiver is high performance, cost effective module compliant with the Gigabit Ethernet and 10/100/1000BASE-T standards as specified in IEEE 802. 3-2002 and IEEE 802.3ab, which supporting 10/100/1000Mbps data- rate up to 100 meters reach over unshielded twisted-pair category 5 cable. The NF-GLC-T supports 10/100/1000 Mbps full duplex data-links with 5-level Pulse Amplitude Modulation (PAM) signals. All four pairs in the cable are used with symbol rate at 250Mbps on each pair. The NF-GLC-T provides standard serial ID information compliant with SFP MSA, which can be accessed with address of A0h via the 2-wire serial CMOS EEPROM protocol. The physical IC can also be accessed via 2-wire serial bus at address ACh.

Features

• Store and forward switching mechanism, support IEEE802.3u|IEEE802.3a, IEEE802.3x, IEEE802.1Q;
• RJ45 port: 10M/100M/1000M rate auto-negotiation in UTP port, full/half duplex mode adapt;
• SFP interface: SGMII/1000BAS-X/100BASE-FX adaptive;
• Standard I2C interface supports brand switch access EEPROM/REGISTER;
• DIP switch: easily configured as a 100M electrical port module in one second

Application

10/100/1000M Gigabit electrical port forwarding module, which can effectively and comprehensively support 10M, 100M, 1000M full duplex or half duplex mode. Stably applied Backbone optical fiber switching networks such as supercomputer centers, big data centers, and monitoring rooms.

According to the needs of on-site application, it has an ingenious one-key 100M dialing code Compatible design, effectively reducing network management and maintenance costs.

Technical Parameters

Product Pictures

Compatibility

Certificates

FAQ