(QSFP28-100G-ER4)

100G QSFP28 ER4 40km Optical Transceiver Module compatible with Cisco Huawei HP Juniper

Hot Pluggable, Duplex LC Connector, Single mode

100G QSFP Transceiver Duplex LC Connector 40km 1310nm Compatible Cisco Qsfp 100g

Description

The QSFP28-100G-ER4 is a transceiver module designed for 40km with FEC (30km without FEC) optical communication applications. The design is compliant to 100GbASE-ER4 of the IEEE 802.3-2012 Clause 88 standard IEEE 802.3bm CAUI-4 chip to module electrical standard ITU-T G.959.1-2012-02 standard . The module converts 4 inputs channels (ch) of 25.78 Gbps to 27.95Gbps electrical data to 4 lanes optical signals, and multiplexes them into a single channel for 100Gb/s optical transmission. Reversely, on the receiver side, the module optically de-multiplexes a 100Gb/s input into 4 lanes signals, and converts them to 4 lanes output electrical data.

The central wavelengths of the 4 lanes are 1296 nm, 1300 nm, 1305 nm and 1309 nm . It contains a duplex LC connector for the optical interface and a 38-pin connector for the electrical interface. To minimize the optical dispersion in the long-haul system, single-mode fiber (SMF) has to be applied in this module.

Features

• 4 lanes MUX/DEMUX design
• Integrated LAN WDM TOSA / ROSA for up to 40 km reach over SMF with FEC (30km without FEC)
• Support 100GBASE-ER4 (Lite) for line rate of 103.125Gbps and OTU4 for line rate of 111.81Gbps
• Aggregate bandwidth of > 100Gbps
• Duplex LC connectors
• Compliant with IEEE 802.3-2012 Clause 88 standard IEEE 802.3bm CAUI-4 chip to module electrical standard ITU-T G.959.1-2012-02 standard ·
• RoHS Compliant Part
• Support FEC(Forward Error Correction)
• Single +3.3V power supply operating
• Built-in digital diagnostic functions Temperature range 0°C to 70°C

Applications

• Local Area Network (LAN)
• Wide Area Network (WAN)
• Ethernet switches and router applications

Optical Parameters

Ordering information

Products Show

Applications:

Packaging & Shipping