Hospitals and medical professionals work around the clock to save lives and mitigate the devastating effects of disease. But providing treatment to patients is just the tip of the iceberg. Viruses and bacteria can have complex effects on patient recovery. Keeping the air free of viruses and bacteria is critical to providing quality care and improving treatment outcomes.
Upper air disinfection system
Hospital waiting rooms and recovery rooms (and sometimes school classrooms) can be routinely air sanitized using an overhead air sanitization system. These systems are usually installed at a height of 2.5 meters and use the natural convection of air to function. Disinfection occurs as the air flows through the system, typically reducing viruses by 70-80%. Typical lamp power can be up to 75 watts.
Open UV Lamps
Another option is an open-frame UV light fixture, which shines the light directly downward. Since there is no shielding, there should be no people in the room when the system is in use.
Air Conditioning System
In air conditioning systems, high output (HO) UV lamps can prevent biofouling on fan coil units. When combined with photocatalytic oxidation technology, it also removes volatile organic compounds (VOCs) such as odors. Depending on your needs, use up to 150 watts in commercial applications and up to 25 watts in residential applications.
other apps
Air disinfection can play an important role in various applications such as hospitals, schools, offices, industry, (food) malls and museums." "With the promotion of emerging UV coatings, inks and other photopolymer materials and ultraviolet radiation light sources, the use of ultraviolet high-pressure mercury lamps in printing and coating industries has become more and more widespread, but because the operators do not know much about this technology, use There have also been many problems in China. As a manufacturer of UV light sources, we will inform you of the precautions as follows:
1. The ultraviolet lamp tube must be matched with the same matched ballast, magnetic leakage transformer and capacitor before it can be used.
2. It must be installed in accordance with the wiring diagram provided by the manufacturer.
3. The light box in which the lamp is installed must be equipped with a good air cooling system to ensure the heat dissipation of the lamp and prevent the substrate from being thermally deformed.
4. Before the tube is put on the machine, it is necessary to wipe off the fingerprints and oil stains on the outer wall of the lamp with gauze and alcohol, otherwise it will cause the lamp to lose transparency after ignition. If the UV curing material has a higher content of volatile solvents or work The environment is polluted by dust. Please wipe the lamp with alcohol every other week to ensure that the lamp does not devitrify prematurely.
5. During the whole use process, keep good contact between the lamp cap and the contact point of the lamp, otherwise it will cause serious oxidation of the lamp cap and cause the lamp tube seal to burst.
6. The UV lamp can only be started when it is cooled down. ; When restarting, you need to wait for the UV lamp to completely cool down before starting. After 5 minutes; the more frequent the switch, the shorter the lamp life.
7. The average lifespan of the high-pressure mercury lamp of Ningbo UV Light & Electricity is 8000-1000 hours, and the surface temperature of the lamp tube is 600~700℃ during normal operation. Mainly related to the number of lamp starts.
8. It is strictly forbidden for the lamp and transformer to work in an overloaded state to avoid lamp explosion or transformer burn-out accidents. The power supply voltage should not fluctuate too much. If it drops suddenly by more than 5%, it may go out by itself. Anything that caused the lamp to burst due to the burning of the lamp cap is not the internal quality of the lamp, and it is purely improper use and will not be returned.
9. The transformer must have good natural ventilation conditions for heat dissipation.
" "Application range:
1. Large-scale domestic sewage treatment, disinfection and sterilization of industrial sewage treatment, industrial drinking water, residential water supply, high-purity water.
2. Overflow sterilization of water in food industry.
3. Aquaculture, large-scale high-density aquaculture plant water supply end sterilization.
4. Underwater advanced oxidation AOT, underwater sterilization and disinfection equipment."
Straight Amalgam UVC LAMPS |
Model no | | | wattage(W) | current(mA) | voltage(v) | life span (h) | UVC LIGHT intensity 100cm distance (μw/cm2) |
diamemter mm | length mm | Ozone |
A55S15H | 15 | 1146 | yes/no | 55 | 400 | 180 | 13000 | 170 |
A75S15H | 15 | 1554 | yes/no | 75 | 400 | 200 | 13000 | 260 |
A80S15H | 15 | 846 | yes/no | 80 | 800 | 120 | 13000 | 240 |
A120S15H | 15 | 1149 | yes/no | 120 | 800 | 170 | 13000 | 330 |
A150S15H | 15 | 1554 | yes/no | 150 | 800 | 2320 | 13000 | 400 |
A250S15H | 15 | 1554 | yes/no | 250 | 1200 | 190 | 13000 | 650 |
A320S15H | 15 | 1554 | yes/no | 320 | 1200 | 180 | 13000 | 800 |