Excimer Lamp 222nm Ultraviolet Disinfection Lamp 60W Sterilizing Table Lamp
Ningbo UV light is a national high-tech enterprise engaged in the development, manufacturing, sales and service
of UVC light, uv lamps . It specializes in the production of UV light and uvc products, air purifiers. The products are sold at home
and abroad and have a good reputation.
222 nm UV excimer lamp
Item number | size | ballast | power | character | note |
NBUVX01 | φ 28*L128mm | DC24V | 30W | | Running water inside |
NBUVX02 | φ 44*L200mm | DC24V | 40W | | No water, No Ozone |
NBUVX03 | φ 44*L300mm | AC230V | 70W | High-voltage transformer for excimer lamps | No water No ozone |
COEXISTENCE WITH HUMAN BEINGS
NO HARMS TO HUMAN'S SKIN AND EYES !
Product detail drawing 产品细节图 +产品细节介绍
1. Green and environmental protection. There is no need to use mercury in manufacturing, no secondary pollution and waste recycling problems;
2. The monochromaticity is good, there is no stable ground state, and there is no self-absorption in the ground state. The power density of the lamp can be made large, the ultraviolet output energy is concentrated, and the local ultraviolet output intensity is high;
3. There is no internal electrode inherent which is in the traditional light source, which avoids the contact between the electrode and the plasma, the corrosion and sputtering of the electrode, and the service life is greatly extended;
Product introduction: application, function, style, etc
The following configuration is a product diagram + table with the specific parameters of the configuration product
| 222nm UVC Lamp |
| Quartz tube / Metal net |
| 50w |
| 110v/220v |
| Customized |
| E222UV50W44-200 |
| Straight |
Service Life | 18000 hours |
Disinfection rate | 99.99% |
Note:
1, *stands for reference
2,Voltage and power of lamp is tested by electronic ballast with power supply of 220±3V voltage and frequency of 50±0.5 Hz.
3,In testing, lamp should be put horizontally and the receiving probe of instrument be 1000mm away from the middle line of the surface of lamp. Before testing, the steady time of releasing electricity should be not less than 5min.