69 W 70w Big wattage Uvc Germicidal Lamp with ozone mite killer
Usage instruction
1. Use of key functions:
1) Press the key once to enter the standby
mode, and the red indicator is on;
2) In standby mode, press the key again to
enter the 15 minute timing function, the
corresponding red indicator flashes, the
buzzer sounds from slow to fast, the light
starts 15 seconds later, and the system
automatically shuts down 15 minutes later.
3) In standby mode, press the ON key twice to
enter the 30 minute timing function. The
corresponding blue indicator flashes and the
buzzer sounds from slow to fast. After 15
seconds, the lamp will start, and after 30
minutes, it will automatically shut down.
4) In standby mode, press the switch three times to
enter the 60 minute timing function, the
corresponding green indicator flashes, and the buzzer
sounds from slow to fast. After 15 seconds, the lamp
will start, and after 60 minutes, it will
automatically shut down.
5) In the shutdown state, long press the switch for 5
seconds to start the long time sterilization
function (the UV lamp is on for a long time);
6) In any startup state, pressing the key again will
shut down the machine.
2. Use of remote control
1) Press the ON/OFF key
2) Select the appropriate time (15 minutes, 30
minutes, 60 minutes)
3) It will start automatically after 15 seconds.
3. Description of switch line
1) Plug in the power cord plug and turn on the power
cord switch.
2) After the switch is turned on, please operate
quickly (because ultraviolet rays are harmful to skin
and eyes, do not look directly at the germicidal
lamp when turning on or off or wear sunglasses when
operating)
3) Sterilization time shall be determined according
to room size.
Note: If the lamp purchased is a radar type lamp, the
disinfection lamp will automatically stop working
when it detects that there is a moving object
approaching, and will automatically continue working
when it detects that there is no moving object.
Rated frequency: | 50~60Hz |
Power(product): | 69W |
Color: | Black/white |
Way of sterilization: | ozone/ozone-free |
Size: | 150*150*510mm |
Net Weight: | 1.2 kg |
Way of control: | Remote/button |
In many schools and kindergartens, in order to prevent the spread of epidemic infectious diseases, ultraviolet lamps are installed in the classrooms for sterilization, but it is stipulated that the ultraviolet lamps cannot be turned on when there are people, and can only be turned on after the people leave. When a novice electrician installs an ultraviolet lamp, it should be marked on the lamp of the ultraviolet lamp to attract the attention of indoor personnel. When installing the control switch of the ultraviolet lamp, it cannot be installed according to the regulations of the general switch, nor can it rely on the method of telling the operator's attention, and it is not allowed to paste a small note on the switch board for instructions. The switch for controlling the ultraviolet lamp should be installed in a lockable box separately, and the key should be managed and controlled by a special person, and outside the box that controls the ultraviolet lamp, the management matters of the ultraviolet lamp should be posted to remind the usefulness of the ultraviolet lamp and Hazard, rely on everyone's supervision and management