Products Specification
Model | XI0 | XI0+ | |
System Parameter | Weight | 280g | |
Dimension | L159*W118*H127(mm) | ||
Average Power Consumption | 25W | 26W | |
Power Supply | 10~30V DC | ||
Device Interface | DJI Skyport/other interface available upon request | ||
Data Storage | USB-disk 256GB | ||
Operating Temperature | -10℃~50℃ | ||
Storage Temperature | -30℃~60℃ | ||
System Accuracy | 5cm | ||
Compatible Platform | DJI M300 RTK/Other UAV models | ||
Laser Unit | Scanning Principle | Mechanic Rotation Mirror | |
Laser Class | ClassⅠ | ||
Wavelength | 905nm | ||
Measurement Range | 0.05m~120m@10%Reflectivity | ||
Range Accuracy | ± 1cn | ||
Horizontal FoV | 360° | ||
Vertical FoV | 30°(-15~+15°) | 31°(-16~+15°) | |
Scanning Point Frequency | Single Return:320,000pts/s Dual Return:640,000pts/s | Single Return:640,000pts/s Dual Return:1,280,000pts/s | |
Return Mode | Single Return/Dual Return | ||
GNSS&IMI | GNSS Signal Tracking | BDS,GPS,GLONASS,GALILEO | |
Positioning Accuracy(post-processing) | Plane:1cm/Elevation:2cm | ||
Position Data Rate | ≥5HZ | ||
Attitude Accuracy(post-processing) | Heading:0.05°/pitch/roll:0.01° | ||
Attitude Data Rate | ≥200HZ | ||
Aerial Camera (External) | Effective Pixels | 26MP | |
Sensor Dimension | 23.5×15.7mm | ||
Image Resolution | 6252×4168 | ||
Image Width FoV | 73° | ||
GSD | 2.3cm@100m Flight Height | ||
Slam Unit (Optional) | Weigh | 1051g(Battery not Included) | |
Dimension | L136W149 H108(mm) | ||
Scanning Mode | Fix Installed | ||
Battery Duration | 4h for Single Battery | ||
Accuracy | Relative Accuracy 2cm/Absolute Accuracy 5cm |
High efficiency
Ultra light aerial survey module, image acquisition not limited by LiDAR measurement range, flight height can be appropriately increased to improve the operation efficiency.
Not affected by light
LiDAR is not affected by environment,less side overlap,wider coverage of single flight,data can be easily collected even in the night.
No signal limitation
Switch to SLAM mobile scanning mode, no limitation of GNSS signal, indoor and outdoor data integrated, collection makes the 3D data more complete
Real-time monitoring
Simultaneous acquisition of point cloud and orthophoto to achieve the real-time monitoring of flight trajectory, 3D point cloud, and images during the whole flight of the system.
X10:
16 lines scanner *1
Camera *1
Skyport *1
Software dongle *1
Camera Adapter *1
GNSS receiver *1
X10+:
32 lines scanner *1
Camera *1
Skyport *1
Software dongle *1
Camera Adapter *1
GNSS receiver *1
SLAM handheld holder *1
Smart Topographic Emergency Smart Civil Defense Pipeline
Grid Mapping Rescue Mining Engineering Inspection
EasyScan X10+ Applied on DJI M300 to measure ancient buildings in China