Multiple views from one

The system integrates various sensors such as LiDAR,GNSS,high-precision lMU and aerial metric camera. With the distributed structure first introduced in the industry and special accessories, it can be disassembled into 4 different independent modes of fully aerial survey (LiDAR+camera), SLAM, airborne LiDAR, and airborne camera. One device, multi-purpose, can easily meet the requirements of different standards of data acquisition under different scenarios.

Products Specification

High efficiency

Ultra light aerial survey module, image acquisition not limited by LiDAR measurement range, flight height can be appropriately increased to improve the operation efficiency.

Not affected by light
LiDAR is not affected by environment,less side overlap,wider coverage of single flight,data can be easily collected even in the night.

No signal limitation
Switch to SLAM mobile scanning mode, no limitation of GNSS signal, indoor and outdoor data integrated, collection makes the 3D data more complete

Real-time monitoring
Simultaneous acquisition of point cloud and orthophoto to achieve the real-time monitoring of flight trajectory, 3D point cloud, and images during the whole flight of the system.

X10:
16 lines scanner *1
Camera *1
Skyport *1
Software dongle *1
Camera Adapter *1
GNSS receiver *1
X10+:
32 lines scanner *1
Camera *1
Skyport *1
Software dongle *1
Camera Adapter *1
GNSS receiver *1
SLAM handheld holder *1

Smart Topographic Emergency Smart Civil Defense Pipeline
Grid Mapping Rescue Mining Engineering Inspection

EasyScan X10+ is applied to measure the city road terrain surveying in SLAM Mode