1000gu Single angle Glossmeter NHG60 Intelligent Gloss Meter with large touchscreen

Gloss is measured by measuring the reflectance of a material on the incident light beam. The measurement of the reflectance should be done with the following rule: angle of incidence is angle of reflection.

Gloss is highly dependent on the angle at which the material is viewed. If have an observer perpendicular to an object can hardly looks luster, but when he looks almost parallel to the material, there may be a gloss observed.

When measuring the gloss, it is therefore important that the angle has been standardized. Typical angles are 20 °, 60 ° and 85 °. For a high gloss, the gloss is generally by 20 °, resulting in lower gloss measured at 60 °. Matte materials are measured at 85 °.

In addition to the method in remission, the gloss can also be measured by the amount of reflective (according to angle of incidence is angle of reflection) to compare light with the amount of light scattered (which can be seen at other angles than the angle of refraction.

Single-angle gloss meter, measuring angle 20 ° / 60 ° / 85 °3.5 "TFT touch screen, 5,000 memory positions comes with PC software raportage20 ° 0-2000GU; 60 ° 0-1000GU; 85 ° 0-160GUHighly accurate ± ± 0.1GU 0.2GU, ± 0.2% GU ergonomic design

Features:

1. 60° angle for semi gloss

2. Display 5 sets of measurement data, good for comparison

3. Measuring mode: basic measurement, statistical measurement, continuous measurement, QC measurement (only for GQC6 software).

4. Continuous mode to check uniformity over large areas

5. Connect to PC, more extend functions

6. Input gloss value manually

7. Large touch screen operation, easy to use

8. Beauty appearance, good man-machine communication interface

9. Powerful functions to meet many different requirements

10. Large storage to save over 5000 data

11. Built-in lithium ion rechargeable battery.

Range

Storage

Standard

Specification