Lithium Deep Cycle Marine Battery, Blue or Black Lithium Battery Rechargeable 12V
Lithium Iron Phosphate (LiFePO4, LFE) is new generation Li-Ion rechargeable battery for high power applications, such as EV car , Power Tool and RC hobby. LFP cells feature with high discharging current, non explosive, long cycle life ( >2000@0.2C rate, IEC Standard), but its energy density is lower than normal Li-Ion cell (Li-Co) (higher NiMH cell). Please click Knowledge on LiFePO4 battery to learn more detail. LFP cell has 3.2V nominal working voltage and shall be cut-off power at 3.6-3.8V per cell during charging. Please see the table below to see comparison between LFP and other rechargeable batteries. LFP battery has the lowest cost if considering its long cycle life
1.General Information
This specification defines the performance of rechargeable LiFePO4 battery pack TB-BL12100F-SC-M110A_3001 manufactured by SHENZHEN TOPBAND BATTERY CO.,LTD, describes the type, performance, technical characteristics, warning and caution of the battery pack.
2. Battery Specification(@ 25±5℃)
NO |
Items |
Characteristics | |
2.1 | Normal capacity | 100Ah | |
2.2 | Nominal energy | 1.28KWh | |
2.3 | Nominal voltage | 12.8V (LFP-4S4P) | |
2.4 | Internal resistance | ≤20mΩ @1kHz AC | |
2.5 | Normal charge voltage | 14.6±0.5V | |
2.6 | Float charge voltage(for Standby use) | 13.8±0.2V | |
2.7 | Allowed MAX charge current | 100A | |
2.8 | Recommended charge current | ≤50A | |
2.9 | Allowed MAX discharge current | 100A | |
2.10 | End of discharge voltage | 8.0V | |
2.11 | Dimension | 318±2mm | |
165±2mm | |||
215±3mm | |||
2.12 | Weight (No accessories) | About:12.5Kg | |
2.13 |
Operation temperature | Charge | 0~45℃ |
Discharge | -20~60℃ | ||
2.14 |
Self-discharge rate |
Residual capacity | ≤3%/Month; ≤15%/ year |
Recover capacity | ≤1.5%/Month; ≤8%/ year | ||
2.15 |
Storage environment | ≤1month | -20~+60℃,5~75%RH |
≥3month | -10~+45℃,5~75%RH | ||
Recommend environment | 15~35℃,5~75%RH | ||
2.16 |
Bluetooth APP | BLUENOVA |
3. Electrical Characteristics & Test Condition
Testing Conditions: Ambient Temperature: 25±5℃; Huminity:45%~75%.
Normal charge:Charge battery under CC(0.33C)/CV(14.6V) mode until over charge protection or the charge current reduce to 0.05C, and then rest for 1h.
NO |
Items |
Criterion |
Condition | |
3.1 |
Normal Capacity | 100Ah |
After Normal charge, discharge @0.33C current to the end of discharge voltage. | |
3.2 |
Internal Impedance | ≤20mΩ | @50% SOC @1kHz AC internal resistance test instrument. | |
3.3 |
Short circuit protection |
Auto cutoff load when short circuit |
Connect the positive and negative of this battery pack through a lead with 0.1Ω resistance. | |
3.4 |
Cycle life @DOD100% |
≥2000 cycles |
After Normal charge,discharge @0.33C current to the end of discharge voltage. Repeat above process until discharge capacity reduce to 80% of initial value. | |
3.5 |
Discharge temperature characteristic@0.33C | -20℃(6h) | ≥70% |
|
0℃ (6h) | ≥80% | |||
25℃(4h) | ≥100% | |||
55℃(4h) | ≥95% | |||
3.6 |
Capacity retention rate |
remain capacity ≥96% | After normal charge, store the battery @25±5℃ for 28days, then discharge capacity @0.33C,the retention capacity accord with criterion. |
4.Circuit Protection
The batteries are supplied with a LiFePO4 Battery Management System (BMS)that can monitor and optimized each single prismatic cell during charge & discharge, to protect the battery pack overcharge, over discharge, short circuit. Overall, the BMS helps to ensure safe and accurate running.
No |
Item |
Content |
Criterion |
4.1 |
Over charge |
Over-charge protection for each cell | 3.75±0.02V |
Over-charge release for each cell | 3.60±0.05V | ||
Over-charge release method |
Under the release voltage | ||
4.2 |
Over discharge |
Over-discharge protection each cell | 2.5±0.05V |
Over-discharge release for each cell | 2.8±0.05V | ||
Over-discharge release method |
Charging | ||
4.3 |
Over current |
Charge over current protection | 130~170A,delay time 1s±0.2s |
Charge over current release |
auto release after 30s | ||
Discharge over current protection | 300~420A,delay time 3s±1s | ||
Discharge over current release |
Charge or auto release after 30s | ||
Short circuit protection |
Available | ||
4.4 |
Temperature |
Charge over temperature protection |
Protect@65±5℃; Release@50±5℃; |
Charge under temperature protection |
Protect@-15±5℃; Release@0±5℃ | ||
Discharge over temperature protection |
Protect@65±5℃; Release@50±5℃; |
5. User guide
5.1 Product dimension