CAT5 Bulk CAT Cable 24 AWG Solid Copper Conductor 4 Twisted Pair UTP
Description
Horizontal patch cable.
Support current category 5 applications, such as: 10 Base-T, 100 Base-T, FDDI, ATM.
Standards
General standards : ISO/IEC 11801, EN 50173, TIA/EIA 568-A.
Construction and Dimensions
Construction | Shielded 4 twisted pairs. |
Conductor | Stranded bare copper (7 × 0.16mm). |
Conductor diameter | AWG 26 (0.48mm). |
Conductor insulation material | Polyethylene (PE). |
Diameter over insulation | 0.95 ±0.05mm. |
Drain wire | Tinned copper, 18 × 0.10mm. |
Shield | Aluminium / polyester foil. |
Jacket material | PVC (Flame retardant). |
Outer diameter | 5.2 ± 0.2mm. |
Electrical characteristics (at 20°C)
Frequency(MHz) | 1 | 4 | 10 | 16 | 20 | 31.25 | 62.5 | 100 |
Attenuation(dB/10m) | 0.3 | 0.6 | 1 | 1.2 | 1.4 | 1.8 | 2.6 | 3.3 |
Next(dB) | 62 | 53 | 47 | 44 | 42 | 40 | 35 | 32 |
ACR(dB/10m) | 62 | 52 | 46 | 43 | 41 | 38 | 32 | 29 |
*Next:Near end crosstalk
Nominal mutual capacitance at 1kHz | 50nF/km. |
Maximum conductor DCR | 135Ohm/km. |
NVP - Nominal Velocity of propagation | 0.75c. |
SKEW -propagation delay difference (100MHz) | Typical 40ns/100m. |
Impedance 1-100MHz | 100 ±15Ohm. |
Temperature range - operation | -20°C to +60°C. |
Temperature range - installation | +0°C to +50°C. |
Minimum bending radius - operation | 20mm. |
Minimum bending radius - installation | 40mm. |
Maximum pulling tension | 80N. |
Flame retardancy | IEC 332-1. |
Energy of flame | 300kJ/m. |
Weight (approximately) | 27kg/km. |
Maximum operating voltage | 48V rms. |
Maximum continuous current per conductor (25°C) | 1.0A. |
Color Code
Pair 1 Black-Blue/Blue.
Pair 2 Black-Orange/Orange.
Pair 3 Black-Green/Green.
Pair 4 Black-Brown/Brown.
Colour | RAL Code | Colour Code |
Grey | RAL 7032 | 2620 |
Black | RAL 9005 | 2622 |
Blue | RAL 5010 | 2623 |
Red | RAL 3000 | 2625 |
Green | RAL 6016 | 2630 |
Yellow | RAL 1021 | 2632 |
Orange | RAL 2003 | 2633 |
Product Picture