SANKON Building Materials Technology Co. LTD is a one stop solutions provider for autoclaved aerated concrete (AAC) production equipment including complete AAC production lines.

We manufacture a wide range of building material machines, including block making machines, concrete panel machines, dry mortar machines, and more.

Our main products include AAC block production line,ALC panel production line,ALC panel production installation of cinstruction equipment and their matched equipment.

Mould-Block Brick Machine

Main features:

Mold is a necessary equipment for the production of aerated concrete and can be put into use.Combined with the side plate, the mold can hold the slurry, and then stand curing and foaming to solidify into the embryo body. At the same time, the side plate carries the embryo body to the cutting machine for cutting, and then it is assembled with the steaming car and then enters into the autoclaved kettle for steaming and raising.

Advantage:

The mould is composed of two main parts, the frame and the bottom plate of the mould. The mould is an important equipment for shaping the finished product. The mould produced by our company has the advantages of good rigidity, simple structure and no leakage of pulp.

Structure:

Mold bottom plate: the four sides are welded with square steel structure. The upper layer of 8mm thick steel plate strengthens the rigidity to prevent deformation and damage to the blank body.

Mold frame: there are two kinds of movable type and integral type.Double-layer hollow side plate ACTS as insulation, and the inner plate is welded with 10mm thick steel plate to increase its rigidity, prevent deformation and prolong the service life.

Fixed die frame, the upper mouth is slightly smaller than the lower mouth, so as to facilitate stripping.Good rigidity of mould frame, easy to demoulding, no leakage of pulp, and has good interchangeability.

The bottom plate is made of special rectangular steel tube, channel steel and steel plate.Baseplate not only durable, good stiffness, not easy to deformation, but also need to have good interchangeability.

Packing & Shipping:

Package conforms to the requirements of customs.

After-sales service:
1.Provide engineers abroad installation and commissioning service.
2.Held online or site training for workers to ensure the safe operation.

3.Our expert will answer any inquiry within 24-48 hours and it will be solved as soon as possible.

4.We supplies the complete technical documents and the relative drawings of the electric components which were written in Chinese and English.

5.Service is available lifelong.