MachineU > China Products > Electrical Equipment & Supplies > Industrial Controls > Other Electrical Equipment
X67BC8321.L12 B&R X67 SYSTEM Bus Controller POWERLINK V1/V2 Controlled Node
X67BC8321.L12 B&R X67 SYSTEM Bus Controller POWERLINK V1/V2 Controlled Node
X67BC8321.L12 B&R X67 SYSTEM Bus Controller POWERLINK V1/V2 Controlled Node
X67BC8321.L12 B&R X67 SYSTEM Bus Controller POWERLINK V1/V2 Controlled Node
X67BC8321.L12 B&R X67 SYSTEM Bus Controller POWERLINK V1/V2 Controlled Node
X67BC8321.L12 B&R X67 SYSTEM Bus Controller POWERLINK V1/V2 Controlled Node
Specifications
Brand Name :
B&R
Model Number :
X67BC8321.L12
Certification :
CE
Place of Origin :
Austria
MOQ :
1EA
Price :
USD
Payment Terms :
T/T
Supply Ability :
10EA
Delivery Time :
3-5 working days
Packaging Details :
Original
Product Brand :
B&R
Product Model :
X67BC8321.L12
Product Type :
Bus controller
Inputs/Outputs :
16 digital channels
I/O power supply :
24 VDC
Dimensions :
53*155*42 mm
Weight :
350g
Warranty :
1 Year
Description

X67BC8321.L12 B&R X67 SYSTEM Bus Controller POWERLINK (V1/V2) Controlled Node

X67BC8321.L12 B&R X67 SYSTEM Bus Controller POWERLINK V1/V2 Controlled Node

MATERIAL NUMBER:

X67BC8321.L12

DESCRIPTION:
  • POWERLINK
  • 16 digital channels, configurable as inputs or outputs
  • M12 connections
  • Integrated hub for efficient cabling
  • I/O configuration and firmware update via the fieldbus
  • Integrated connection to the local expansion via X2X Link for up to 250 additional modules
  • Configurable I/O cycle (starting at 200 ms)

The bus controller makes it possible to connect X2X Link I/O nodes to POWERLINK. It is also possible to operate the X2X Link cycle synchronously 1:1 or synchronous to POWERLINK using a prescaler.

Additional X2X Link I/O nodes (X67 modules or other modules based on X2X Link) can be connected using the integrated X2X Link connection. Mechanically, POWERLINK is connected via an IP67-rated standard D-coded M12 Ethernet connector.

POWERLINK is a standard protocol for Fast Ethernet equipped with hard real-time characteristics. The POWERLINK Standardization Group (EPSG) ensures that the standard remains open and is continually developed:: www.ethernet-powerlink.org.

Short description
Bus controller POWERLINK (V1/V2) controlled node
General information
Inputs/Outputs 16 digital channels, configurable as inputs or outputs using software, inputs with additional functions
Insulation voltage between channel and bus 500 Veff
Nominal voltage 24 VDC
B&R ID code
Bus controller 0xA90E
Internal I/O module 0x1A1D
Sensor/Actuator power supply 0.5 A summation current
Status indicators I/O function per channel, supply voltage, bus function
Diagnostics
Outputs Yes, using LED status indicator and software
I/O power supply Yes, using LED status indicator and software
Connection type
Fieldbus M12, D-coded
X2X Link M12, B-coded
Inputs/Outputs 8x M12, A-coded
I/O power supply M8, 4-pin
Power output 15 W X2X Link power supply for I/O modules
Power consumption
Fieldbus 4.2 W
Internal I/O 2.5 W
X2X Link power supply 24.3 W at maximum power output for connected I/O modules
Certifications
CE Yes
UKCA Yes
ATEX Zone 2, II 3G Ex nA IIA T5 Gc
IP67, Ta = 0 - Max. 60°C
TÜV 05 ATEX 7201X
UL cULus E115267
Industrial control equipment
HazLoc cCSAus 244665
Process control equipment
for hazardous locations
Class I, Division 2, Groups ABCD, T5
EAC Yes
KC Yes
Interfaces
Fieldbus POWERLINK (V1/V2) controlled node
Type Type 2
Variant 2x M12 interface (hub), 2x female connector on module
Line length Max. 100 m between 2 stations (segment length)
Transfer rate 100 Mbit/s
Transfer
Physical layer 100BASE-TX
Half-duplex Yes
Full-duplex No
Autonegotiation Yes
Auto-MDI/MDIX Yes
Hub propagation delay 0.96 to 1 µs
Min. cycle time
Fieldbus 200 μs
X2X Link 200 μs
Synchronization between bus systems possible Yes
I/O power supply
Nominal voltage 24 VDC
Voltage range 18 to 30 VDC
Integrated protection Reverse polarity protection
Power consumption
Sensor/Actuator power supply Max. 12 W
Sensor/Actuator power supply
Voltage I/O power supply minus voltage drop for short-circuit protection
Voltage drop for short-circuit protection at 0.5 A Max. 2 VDC
Summation current Max. 0.5 A
Short-circuit proof Yes
Digital inputs
Input characteristics per EN 61131-2 Type 1
Input voltage 18 to 30 VDC
Input current at 24 VDC Typ. 4 mA
Input circuit Sink
Input filter
Hardware ≤10 μs (channels 1 to 4) / ≤70 µs (channels 5 to 16)
Software Default 0 ms, configurable between 0 and 25 ms in 0.2 ms intervals
Input resistance Typ. 6 kΩ
Additional functions 50 kHz event counting, gate measurement
Switching threshold
Low <5 VDC
High >15 VDC
Event counters
Quantity 2
Signal form Square wave pulse
Evaluation Each negative edge, cyclic counter
Input frequency Max. 50 kHz
Counter 1 Input 1
Counter 2 Input 3
Counter frequency Max. 50 kHz
Counter size 16-bit
Gate measurement
Quantity 1
Signal form Square wave pulse
Evaluation Positive edge - Negative edge
Counter frequency
Internal 48 MHz, 3 MHz, 187.5 kHz
Counter size 16-bit
Length of pause between pulses ≥100 µs
Pulse length ≥20 µs
Supported inputs Input 2 or input 4
Digital outputs
Variant Current-sourcing FET
Switching voltage I/O power supply minus residual voltage
Nominal output current 0.5 A
Total nominal current 8 A
Output circuit Source
Output protection Thermal shutdown in the event of overcurrent or short circuit, integrated protection for switching inductive loads, reverse polarity protection of the output power supply
Diagnostic status Output monitoring with 10 ms delay
Leakage current when the output is switched off 5 µA
Switching on after overload shutdown Approx. 10 ms (depends on the module temperature)
Residual voltage <0.3 V at 0.5 A nominal current
Peak short-circuit current <12 A
Switching delay
0 → 1 <400 µs
1 → 0 <400 µs
Switching frequency
Resistive load Max. 100 Hz
Inductive load See section "Switching inductive loads".
Braking voltage when switching off inductive loads 50 VDC
Electrical properties
Electrical isolation
Bus isolated from POWERLINK and channel
Channel not isolated from channel
Operating conditions
Mounting orientation
Any Yes
Installation elevation above sea level
0 to 2000 m No limitation
>2000 m Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529 IP67
Ambient conditions
Temperature
Operation -25 to 60°C
Derating -
Storage -40 to 85°C
Transport -40 to 85°C
Mechanical properties
Dimensions
Width 53 mm
Height 155 mm
Depth 42 mm
Weight 350 g
Torque for connections
M8 Max. 0.4 Nm
M12 Max. 0.6 Nm
Product tags

rs 485 controller

,

rs485 controller

,

rs485 ptz controller
Send your message to this supplier
Send Now

X67BC8321.L12 B&R X67 SYSTEM Bus Controller POWERLINK V1/V2 Controlled Node

Ask Latest Price
Product Detail
Brand Name :
B&R
Model Number :
X67BC8321.L12
Certification :
CE
Place of Origin :
Austria
MOQ :
1EA
Price :
USD
Contact Supplier
X67BC8321.L12 B&R X67 SYSTEM Bus Controller POWERLINK V1/V2 Controlled Node
X67BC8321.L12 B&R X67 SYSTEM Bus Controller POWERLINK V1/V2 Controlled Node
X67BC8321.L12 B&R X67 SYSTEM Bus Controller POWERLINK V1/V2 Controlled Node

Joyoung International Trading Co.,Ltd

Verified Supplier
4 Years
fujian, xiamen
Since 2013
Business Type :
Distributor/Wholesaler, Exporter, Trading Company, Seller
Main Products :
ABB Module, Allen Bradley Module, Siemens PLC
Total Annual :
2350000-3125000
Employee Number :
>100
Certification Level :
Verified Supplier
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products B&R Automation Plc
MachineU China Products Electrical Equipment & Supplies Industrial Controls Other Electrical Equipment
Contact Supplier
Submit Requirement