GE IS200BAIAH1BEE Mark VI Bridge Application Interface Card In Stock

Product Details:

Description:

The IS200BAIAH1BEE or BAIA is intended to be a replacement PCB. It has an EEPROM that comes with factory-preloaded firmware. This memory circuit should never be reprogrammed or removed. If it stops working or becomes damaged, the complete board will need to be removed and replaced. The BAIA also uses an RS-232C I/O interface which goes to the drive system keypad or PC from a DSPX board. The IS200BAIAH1BEE should be placed vertically into the control card rack assembly it is assigned to. On the faceplate of the BAIA, there is a warning label that alerts the user to only mount this card into Slot 1 on the rack. The slots on the rack are specifically configured for certain boards. Installing this board into a slot other than the first one will result in damage to the board. There is an LED indicator on the faceplate that is labeled IMOK.

GE IS200BAIAH1B and IS200BAIAH1BEE are bridge application interface cards designed for GE Mark VI control systems. These modules are mainly used to connect and manage communication and signal transmission between generators and excitation systems to ensure efficient coordination and control between devices. This interface card has multiple input and output channels, can process digital signals from generators and excitation systems, and monitor equipment status in real time. Through efficient data exchange, IS200BAIAH1B and IS200BAIAH1BEE can optimize excitation control strategies and improve generator performance and response speed. This flexible interface design enables it to adapt to different application requirements and integrate seamlessly with other control modules.

The IS200BAIAH1B is designed to function as a bridge application interface board in Innovation Series Drive Systems. This board provides earth-ground reference and isolation for signal inputs from terminal boards. Each board is designed with an onboard EEPROM containing firmware not intended for removal or field programming. The Innovation Series that this particular IS200BAIAH1B Bridge Application Interface Board printed circuit board product offering belongs to has to be considered a child product series of the greater Mark VI Turbine Control System Series that this IS200BAIAH1B PCB was originally devised for.

The IS200BAIAH1B is an Innovation series board, which is designed to be placed into a specific rack slot. This board can be damaged if it is installed into the improper rack slot. Because of this damage risk, it is important too to consider PCB dimensions before making a purchase decision. This particular printed circuit board comes revised with roughly-measured dimensions of 12 inches lengthwise by 9 inches wide. The thickness of this PCB is no greater than an inch and a half. The IS200BAIAH1B has three relays, six varistors, four jumper switches, three test points, and several integrated circuits. The board has two backplane connectors located on one edge. These backplane connectors are labeled as Pancon 106-128-023 connectors, which have a generally low market availability. Jumpers should be placed in either the VIN position or the 4-20 mA position.