Bently Nevada 3500/15-02-02-00 125840-01 Power Supply High Voltage ac Power Input Module (PIM)

Product Details:

Additional Information:

Description:

The 3500 System provides continuous, online monitoring suitable for machinery protection applications, and is designed to meet the requirements of the American Petroleum Institute’s API 670 standard for such systems. The system’s modular rack-based design includes the following components:

3500/05 Instrument Rack (required)

One or two 3500/15 Power Supplies (required)

3500/22M Transient Data Interface (TDI) Module (required)

One or more 3500/XX Monitor Modules (required)

One or more 3500/32M (4-channel) or 3500/33 (16-channel) Relay Modules (optional)

One or two 3500/25 Keyphasor* Modules (optional)

One or more 3500/92 Communication Gateway Modules (optional)

Input/Output (I/O) Modules (required)

3500/94M VGA Display (optional)

Internal or external intrinsic safety barriers, or galvanic isolators for hazardous area installations (optional)

3500 System Configuration Software (required) System components are described in more detail in the following section and in their individual datasheets.

The 3500 Power Supplies are half-height modules and must be installed in the specially designed slots on the left side of the rack. The 3500 rack can contain one or two power supplies (any combination of ac and/or dc) and either supply can power a full rack. If installed, the second supply acts as a backup for the primary supply. When two power supplies are installed in a rack, the supply in the lower slot acts as the primary supply and the supply in the upper slot acts as the backup supply. Removing or inserting either power supply module will not disrupt operation of the rack as long as a second power supply is installed. The 3500 Power Supplies accept a wide range of input voltages and converts them to voltages acceptable for use by other 3500 modules. Three Power Supply versions are available with the 3500 Series Machinery Protection System as follows:

• AC Power

• High Voltage DC Power Supply

• Low Voltage DC Power Supply

The 3500/15 Power Supply can be ordered for ac or dc input power, providing compatibility with voltage sources worldwide. Line noise filters are standard. The 3500 Rack can operate from a single supply, or dual supplies can be used to provide redundancy for situations that cannot tolerate power interruption.

Dual supplies reside in the upper and lower positions of the left-most rack slot. Redundant supplies can use separate voltage sources. For example, the primary (lower) supply can operate with 120 Vac power while the backup (upper) supply can be powered from an uninterruptible 24 Vdc source.

Each supply can individually provide power to the entire rack and its modules. When redundant supplies are used, the lower supply acts as primary power for the rack while the upper supply acts as a backup, ready to instantly and automatically operate as the primary rack supply without interrupting rack functions should the primary supply fail.

The 3500/15 Power Supply module has self-monitoring functions that allow it to determine if all its output voltages are within specifications. The module annunciates this via a green Supply OK LED on the power supply’s front panel.

Datasheet Link:

3500-15 AC and DC Power Supplies Datasheet - 14153...