Single phase 220V 60hz High speed 2 Poles AC Fan Motors for air purifier

Introduction

This is a 2 Poles AC fan motor for air purifier. Till now, Hengsheng has a various of specifications of AC BLDC fan motors, and different induction motor, geared motor, PM motor with gearbox. Because of its long working life, stable performance and low failure rate, our products are well received by customers. We have got the certification of CCC, RoHS and ISO9001:2008.

Specification

Product name : AC fan motor

• Rated Voltage:110/230V 50Hz/60Hz
• Output power range:10W-55W
• IP level:IP20/IP44
• High quality deep groove ball bearing with low noisy and long operating life
• Insulation class:B/F
• Automatic thermal cutoff
• Used in heating ventilation and air conditioning area

Our service

1. How can we guarantee quality?
Our AC Fan Motors always a pre-production sample before mass production; Always final Inspection before shipment.

• What is your lead time?

It depends on the order quantity and the season you place the order. Usually we can ship within 30 days.

• Could you OEM the AC fan motor?

Yes, it is fine for us.

• What is the shipping method of the AC fan motor ?

Usually by sea as the fan motor is heavy goods.

More information of AC fan motor

AC fan motor in operation due to friction, vibration, insulation aging and other reasons, it is inevitable to fail. If these faults are checked, discovered and eliminated in time, they can effectively prevent accidents.

Common fault checks

1. Using the sense of smell, analyze that the fault AC fan motor has no peculiar smell in normal operation, if the smell is ambiguous, it is a fault signal, such as burnt smell, is issued by the insulator barbecue, and with the increase of the fan motor temperature, it will smoke in severe cases; Such as oil tar smell, most of them are bearings lack of oil, and the peculiar smell of oil and gas evaporation when it is close to the dry grinding state.

2. Use the feeling, check the fault touch the shell of the fan motor with your hand, you can roughly judge the temperature level, if you touch the motor shell with your hand and feel very hot, the temperature value is very high, you should check the reasons, such as: excessive load, high voltage, etc., and then troubleshoot the cause.