Our High speed gate turnstile can be used for both indoor and outdoor(with Shelter). They are optimized Pedestrian Access Control Solution for Subway,Museum, Colleges, Commercial building, Library, hostipal, School, Bank etc.
Unique Features:
1. Elegant Design with stainless steel housing which is rust-proof
2. 24 V DC brush-less motor+Encoder+Clutch brake provides a higher level safety
3. Uni-/Bi-direction passing
4. Higher speed. 0.4 second open/close speed
5. 50,000,000 cycles of MCBF.
Main Features of swing barrier gate:
1. Can be used with variety of card readers: IC / ID card readers, bar codes,
fingerprints, etc. (Via dry contact signal)
2. Direction can be set as unidirectional or bidirectional.
3. The device can be connected to management computer to realize remote control
and management.
4. LED direction indicator (optional)
5. Gate auto opens when power off and auto close when power on, complying with
fire safety requirements.
6. Support infrared photocell for anti-pinch and reset function.
7. Anti-breakthrough function. The gate is locked automatically until opening signal
received.
8. Synchronization functions (for dual gate equipment).
9. Automatic reset function. Should the user fail to pass within the prescribed time
(default time is 5 seconds), the system will cancel the authority of the current user
automatically.
10. Gate can be set as normally open or normally closed.
Specifications of swing arm barrier:
Frame Material | 304 Stainless Steel |
Dimension | L1200*W220*H1000mm |
Infrared sensors | 10 pairs |
Arm lenght | 320mm |
Passage width | 700mm |
Power Supply | 100V~240V, 50/60Hz |
Motor | 24V DC |
Power Consumption | 35W |
Operation Temperature | -20 °C ~+60 °C |
Operation Humidity | 0 ~ 95% (No freeze) |
Working Environment | Indoor / Outdoor with Shelter |
Flow Rate | About 30 people per minute |
Lifetime | No less than 5,000,000 |
Noise | ≤50dB |
Emergency mode | Supported |
Case references