Anti Shock Sliding Barrier Gate Access Control Barrier 220V AC Servo Motor
Functions and Features of the sliding gates :
- When the power is off, the arms will automatically open, and when the power is on again, the arms will automatically hug.
- When a valid card is read and a passenger passes, the arm can be closed with a delay of 1-60 seconds, which can be set in the control panel.
- Automatic reset function: After the card is read, if the passenger fails to pass within the specified time, the full-height turnstile will cancel the right of passage. The prescribed passing time period can be set by the management personnel.
- If the passenger passes without reading the card or without reading the valid card, the flap barrier will give an alarm until the passenger returns from the flap barrier, and then take a valid card to pass through.
- The flap barrier has a 485 interface for remote control.
- Anti-shock function: If there is no bill, the arm will be hugged tightly.
- Double anti-pinch function: photocell anti-pinch and mechanical anti-pinch. When passengers pass through the wing gate, the photocell will detect this situation and will not close. After the passenger passes, the arm will automatically close. During the repositioning process, if the arm encounters any obstacle, the arm will automatically return or stop working for a period of time with a little force. It will also call the police.
Specification:
Structure | frame structure/standard stainless steel shell |
Production | full CNC laser cutting machine production |
Dimension | 1406*300*1023mm |
Maximum channel width | 600mm |
N.W. | 110KG |
Power | 50W |
Drive motor | stepping motor |
Power on state require time | 3 seconds |
Failure automatically reset time | 10 seconds |
Passing speed | <=40 persons/min |
Application
Widely used in commercial and management office buildings, ministries, government service halls, public buildings, banks and financial institutions, airports, hotels, clubs, high-end residential areas, schools, colleges and universities, industrial facilities, etc.
