Loop Detector Sensor 20-2000μH -40~70℃ Lightning Protection Auto Reset
Product Name: LD-102 Parking Barrier Gate Loop Detector
Description: The LD-102 Parking Barrier Gate Loop Detector is purpose-built for parking barrier gates, ensuring seamless automatic gate operation by accurately identifying and detecting a wide range of vehicles, including oversized vehicles, trucks, and motorcycles.
Advantages:
The LD-102 Parking Barrier Gate Loop Detector delivers robust and dependable vehicle detection capabilities, offering wide sensing range, enhanced sensitivity, automatic reset capability, flexible detection level selection, robust lightning protection, and broad operating environment range.
Product parameters:
Specification | Value |
Self-turning Range | 20-2000μH |
Sensitivity | 16-way selectable / Highest 0.010% DL/L / Lowest 2.56% DL/L |
Frequency | Four-step switch selectable 20-80KHz |
Power Requirements | 110-240VAC (48 to 62Hz) / 12-24VADC |
Operation Temp | -40℃ to +70℃ / (-111°F to +158°F) |
Fault Output | Blinks slowly: may indicate a short circuit or insufficient number of turns <br> Blinks faster: may indicate an open loop or excessive number of turns |
Response Times | Turn-on 10-90MS / Turn-off 10-90MS |
Visual Indications | Power LED - Red <br> Channel LED - Green |
Reset | Reset by push button on the front of the enclosure |
Relay Output | Presence relay / Fault relay |
Humidity | Up to 95% relative humidity without condensation |
Switch 2 (Dipswitch Settings)
1.DIP 1 & DIP 2 Setting Special Functions
2.DIP 3 & DIP 4 Setting Relay B Output
3. DIP 5 Setting Automatic Reset
4. DIP 6 & DIP 7 & DIP 8 Setting Relay A Delay
5. DIP 9 & DIP 10 Setting Frequency (40 K to 100 KHz). Used to avoid the interference
Loop Installation:
Trouble Shooting:
Mass Production:
Our production line ensures efficient mass production, rigorous quality control, and thorough pre-shipment testing to deliver Loop detector products of the utmost perfection.
Certification: