small desktop A3 30cm dtf transfer film printer with roll
dtf 30cm printer uses a specific kind of water-based ink to print a film transfer.
Once the ink is dry,powdered glue is applied to the back. Now it is heat cured ready for
storage or instant use.One of the benefits to DTF Printers is there is no need to use pre-
treatment. The powdered glue does this job for you. Once heat pressed you can transfer
to any kind of fabric ,such as pure cotton, polyester, spandex, silky...and aslo light color
and dark color.
Paraments of dtf printer with roll :
l3200 dtf printer | |
Model | A3 dtf printer(PRINTER) |
Print Width | 30cm |
Ink Type | Pigment ink |
color system | C-M-Y-K+W |
Printer Head | 1pieces xp600 |
Printer packingSize | 100*70*70cm |
RIP software | Maintop RIP |
Shaking powder machine | |
Model | Shaking powder machine |
Power | 4kw |
shaking powder machine Size | 2.22M (L)X1.26M (H )X1.38M (W ) |
Usage | Printable Heat Transfer PET No Need CUTTING |
Operate environment | Tempeature: 15℃-30℃ Humidtiy: 35%-65% |
gross Weight | 300KG |
operation process of A3 dtf transfer film printer machine:
1. Use software draw the pictures , and then use the printer to print the pattern on the
PET machine
2. Sprinkle an appropriate amount of hot melt poweron the printed PET film and shake
off the excess hot melt power
3. Put the PET film on the heat transfer machine and back for 5-7 minutes ,until the hot
melt powder melts , take out the PET film
4. Lay the T shirt flat on the heat transfer amchine and stick the side sprinkled with hot
melt powder on the T shirt for pattern hot samping and the hot stamping takes 15-20 seconds
the application of A3 dtf printer machine: