Acetek Fast shipping DTF printer any fabric printing a3 dtf printer printing machine 30cm
shaker powder machine
All-in-one machine for heat transfer and powder shaking:
1. Convenient, high efficiency and low cost: One-stop hollow printing, no cutting plotter,
laminating machine, hollow machine,no waste discharge, time and labor saving.
2.Good effect: the pattern is soft to the touch, washable and stretchable, and the wet and dry
fastness reaches level 4.
3.A wide range of applicable materials: printable materials include cotton fabrics, high- -elastic
fabrics, nylon fabrics,chemical fiber fabrics, swimwear, denim, PVC, EVA, etc.
Paraments of 30cm dtf printer :
l3200 dtf printer | |
Model | A3 dtf printer(PRINTER) |
Print Width | 30cm |
Ink Type | Pigment ink |
color system | C-M-Y-K+W |
Printer Head | 1pieces xp600 |
Printer packingSize | 100*70*70cm |
RIP software | Maintop RIP |
Shaking powder machine | |
Model | Shaking powder machine |
Power | 4kw |
shaking powder machine Size | 2.22M (L)X1.26M (H )X1.38M (W ) |
Usage | Printable Heat Transfer PET No Need CUTTING |
Operate environment | Tempeature: 15℃-30℃ Humidtiy: 35%-65% |
gross Weight | 110KG |
operation process of A3 dtf printer machine:
1. Use software draw the pictures , and then use the printer to print the pattern on the
PET machine
2. Sprinkle an appropriate amount of hot melt poweron the printed PET film and shake
off the excess hot melt power
3. Put the PET film on the heat transfer machine and back for 5-7 minutes ,until the hot
melt powder melts , take out the PET film
4. Lay the T shirt flat on the heat transfer amchine and stick the side sprinkled with hot
melt powder on the T shirt for pattern hot samping and the hot stamping takes 15-20 seconds
the application of 30cm dtf printer machine: