GENERAL PURPOSE SILICONE SEALANT is a one part, general purpose, acetoxy cure, high quality silicone sealant designed for glass and glazing application. It has very good weather ability, waterproof and good adhesion to most construction materials.
Test Parameter | Unit | Result |
As Supplied Tested at 23ºC and 50% RH | ||
Specific Gravity | g/ml | 0.95±0.02 |
Flow (sag or slump) | mm | 0 |
Extrusion Rate Skin Time | ml/minute minute | 125 5~10 |
Tack-free Time | hour | ≤1.0 |
Curing time (5mm) | hour | ≤18 |
As Cured-after 21 days at 23ºC and 50% RH | ||
Durometer Hardness, Shore A | Points | 18 |
Movement Capability | % | ±20 |
Tensile/Modulus at 50% Elongation | Mpa | 0.28 |
Tensile/Modulus at 100% Elongation | Mpa | 0.35 |
Ultimate Tensile Strength Ultimate Elongation at Break | Mpa % | 0.4 380 |
Item | Technical requirement | Test results | |
Sealant type | Neutral | Neutral | |
Slump | Vertical | ≤3 | 0 |
Level | Not deformed | Not deformed | |
Extrusion rate,g/s | ≤10 | 8 | |
Surface dry time,h | ≤3 | 0.5 | |
Durometer haardness (JIS Type A) | 20-60 | 44 | |
Max tensile strength elongation rate, 100% | ≥100 | 200 | |
Stretch adhesion Mpa | Standard condition | ≥0.6 | 0.8 |
90ºC | ≥0.45 | 0.7 | |
-30ºC | ≥ 0.45 | 0.9 | |
After soaking | ≥ 0.45 | 0.75 | |
After UV light | ≥ 0.45 | 0.65 | |
Bond failure area,% | ≤5 | 0 | |
Heat aging | Thermal weight loss,% | ≤10 | 1.5 |
Cracked | No | No | |
Chalking | No | No |
4 Realated Products
5 Customer feedback
6 Our factory
SHANGHAI JUNBOND BUILDING MATERIAL CO., LTD Located in Shanghai, China.
Our company is a large group in the production of silicone sealants;
The main products are structural silicone sealant, stone silicone sealant, weather-resistant silicone sealant, two-component silicone sealant, and other products;
The factories are located in 6 different provinces in China, relying on raw material supply bases to produce professional silicone sealants.
10 Certificate
11 Exhibition