MachineU > China Products > Chemicals > Adhesives & Sealants

Industry Windshield Polyurethane Sealant 300ML Urethane Sealant For Auto Glass

Specifications

Brand Name :

Junbond

Model Number :

JB19

Certification :

ISO

Place of Origin :

China

MOQ :

1000 cartons

Price :

Negotiable

Payment Terms :

L/C, , T/T, Western Union, MoneyGram

Supply Ability :

14400 cartons per day

Delivery Time :

10-15 days

Packaging Details :

300ml aluminum tube / 1x20 ft container : 1440 cartons

Other names :

Windshield sealant

Packaging Type :

24 pieces per carton

Skin Over Time :

Approx 25 mins

Packaging :

Aluminum tube

Application :

Industry glass

Storage :

5~25℃.

Shelf life :

9 months

Usage :

Car window glass

Description

300ML Shear Strength Black Color Fast Cure Sealant For Automotive Windshield Cola Parabrisa

Junbond^® JB-19 is one-component moisture curable polyurethane sealant. It has excellent bonding and sealing performance. No corrosion and pollution to substrates, environment friendly, no bubbles during application etc.

Application environment temperature 5~35℃, humidity 50~70%RH. When the temperature below 5℃, recommended place products in the environment of 30~40℃ for 1H (No more than 3H).

Product Description

High Performing glass to metal

No sagging and high strength solution

Automotive wind shield fixing expert

Products Benefit:

a. Fast curing under room temperature, no sagging, solvent free

b. High bonding strength,

c. Good chemical and water resistance

d. No conductive

e. Excellent noise, vibration and impaction resistance

f. Automotive OEM quality

Application Areas:Suitable for windshield and side & back window glass bonding.

Properties

- Suitable for applying to the opening of the windscreen made of any material, including aluminum;
- Due to its high initial hardness and exceptionally strong binding properties, no additional fixation of the glass is required;
- Very good resistance to sagging;
- Does not "reach" for the tool;
- High speed of polymerization;
- High shear strength and high shear modulus. Good elasticity even after long-term use;
- Very low electrical conductivity;
- Good adhesion to the residual materials of the old adhesive joint;
- High resistance to UV radiation;
- Excellent adhesion to glass, glass with a ceramic coating and to painted surfaces;

General information:

1	Brand Name	Junbond
2	Model	JB19
3	Main Material	Polyurethane
4	Type	One-component
5	Color	Black
6	Packaging Type	Carton
7	Carton	24 pieces/carton
8	Strength	High
9	Application Industry	Glass to metal
10	Certificate	ISO9001:2000, MSDS
11	Shelf life	9 -12 Months(4°C-40°C)
12	OEM/OEM	Available

Technical data:

Items	Properties
Appearance	Black, homogeneous paste
Sagging properties(mm) GB/T 13477.6	0
Tack free time②(min) GB/T 13477.5	20, approx.
Curing speed(mm/d) HG/T 4363	3.2, approx.
Non-volatile contents ( %) GB/T 2793	95, approx.
Shore A-hardness GB/T 531.1	60, approx.
Tensile strength(MPa) GB/T 528	3.5, approx.
Elongation at break(%) GB/T 528	350, approx.
Tear strength( N/mm) GB/T 529	6.0, approx.
Tensile-shear strength(MPa)GB/T 7124	1.5, approx.
Operating temperature(℃)	-40~90

Cautions

Keep away from children.
Avoid contacting with skin and eye. For skin contacted, remove the sealant by cloth, wash skin thoroughly with soap and water. For eye contacted, hold eyelids apart and flush thoroughly with water, contact physician.

Packing specification

Cartridge 310ml
Sausage 400ml
Sausage 600ml

Transport and storage

Transport: Keep away the sealed product from moisture, the sun, high temperature and avoid collisions.
Storage: Keep sealed into cool, dry place.
Storage temperature: 5~25℃. Humidity: ≤50%RH.
Cartridge and Sausage 9 month, Pail 6 month.

Color

Black

Application:

Operation:

Clean before operation

Clean and dry all surfaces by removing foreign matter and contaminants such as oil dust, grease,

frost, water, dirt, old sealants and any protective coating. Dust and loose particles should be cleaned.

Direction of operation

Tool:Manual or pneumatic plunger caulking gun

For cartridge

1. Cut nozzle to give the required angle and bead size
2.Pierce the membrane at the top of the cartridge and screw on the nozzle
3.Place the cartridge in an applicator gun and squeeze the trigger with equal strength