MTL5524 SOLENOID/ALARM DRIVER

The MTL5524 enables an on/off device in a hazardous area to be controlled by a volt-free contact or logic signal in the safe area. It can
drive loads such as solenoids, alarms, LEDs and other low power devices that are certified as intrinsically safe or are classified as non-energy storing simple apparatus. The MTL5524 has its phase reversed by connecting a wire link between pins 8 and 9.

SPECIFICATION
See also common specification

• Number of channels
One
• Location of load
Zone 0, IIC, T4–6 hazardous area if suitably certified
Div.1, Group A, hazardous location

• Hazardous-area output
Minimum output voltage: 13.6V at 48mA
Maximum output voltage: 24V from 180Ω
Maximum off-state output voltage: 4V from 180Ω
Current limit: 48mA minimum
• Output ripple
< 0.5% of maximum output, peak-to-peak
• Control input
Suitable for switch contacts, an open collector transistor or logic drive
0 = input switch closed, transistor on or <1.4V applied
1 = input switch open, transistor off or >4.5V applied
• Response time
Output within 10% of final value within 100ms
• LED indicators
Green: power indication
Yellow: output status, on when output active
• Maximum current consumption
100mA at 24V dc
• Power dissipation within unit
1.3W with typical solenoid valve, output on
1.9W worst case
• Safety description
U_o=25V I_o=147mA P_o= 0.92W U_m = 253V rms or dc

Related Models:

Company Introduction:

Achievers Automtation Limited deals with a complete range of industrial automation components and instruments with more than 12 years’ experience, and always try best to provide quality goods and timely services to our valued customers from over 45 countries worldwide.

Achievers serves the Oil & Gas industries, EPC contractors, System Integrators and other industrial automation and process control companies worldwide. The industries we serve include Oil & Gas, Chemical, Petrochemical, Mining, Energy & Utilities, Pharmaceuticals, Electronics, Food and etc.

The company provides a diversified range of products to meet any process control and automation challenges in the industry. We stock and distribute pressure & temperature transmitters, level controller & transmitters, temperature probes, flowmeter, vibration monitoring devices, chart recorders, sensors, PLC, DCS, HMI, measuring instruments and other field instruments.

Below are the TOP BRANDS we handle in the past 12 years:

Bently Nevada 3500 Vibration Monitoring System&3300 Proximity Probes, Sensors & Transducer Systems

ALLEN BRADLEY Industrial Control Products

Pepperl-Fuchs Industrial Sensors & Isolated Barrier

MTL Instruments Isolated Barrier

Endress+Hauser Flow, Level, Liquid Analysis Instrument

YOKOGAWA DCS & Field Instruments & Process Analyzers

Rosemount Analytical Products

ASCO Solenoid Valves

FISHER Valve&Positioner

IFM Sensors & Controllers

ABB V18345 Valve Positioner

ABB Bailey Infi 90 and Net 90 Modules

FISHER DLC3100 Digital Level Controller

TELEDYNE Oxygen Sensor & Fuel Cell

HONEYWELL Switches & Transmitter

VEGA Level Measurement Products

AUMA Electric Actuators and Gearboxes

SMC Controls, process, and Industrial products

SICK Industrial Sensors

FESTO Pneumatic & Electric Automation Products

YASKAWA Industrial Ac Drives

BECKOFF Controllers & I/O Modules

BALLUFF Linear Position Sensors

SCHMERSAL Safety switches & Safety Systems

FAQ of Achievers
Q:Are the Products Genuine OEM Units?
A: These items have been certified by Achievers Automation Limited to be genuine OEM Units obtained through OEM or independent third-party channels.
Q:How will you arrange shipment?
A: We can arrange shipment based on your request. We have cooperated forwader who can arrange shipment via FedEx, DHL,TNT with good price.
Q:What is the warranty of goods?
A: One-year Warranty.