Product Details:

Manufacturer : AUMA
Product No. : SAR 14.2-F14
Product Type : Multi-turn Actuators

Multi-turn actuators are high quality electro-mechanical devices. Possible damage can be avoided by
observing the following items.

1. TRANSPORT AND STORAGE
Transport to place of installation in sturdy packing.
Do not lift the actuator by the handwheel.
Store in well ventilated, dry room.
Protect against humidity from the floor by storing on a shelf or on a wooden frame.
Cover to protect against dust and dirt.
Apply corrosion protection agent to machined surfaces.

2. SERVICE CONDITIONS
AUMA multi-turn actuators can be used at following ambient conditions:
Model Temperature
SA -20°F to +175°F (Standard)
SAL -40°F to +140°F
SAH +32°F to +250°F
SA(IP68) -20°F to +175°F
SAR -20°F to +140°F

3. MOUNTING TO THE VALVE/GEARBOX
Mounting and operation can be in any position.
Check whether output drive flange suits the valve/gearbox.
CAUTION: Spigot at flanges should be loose fit!
ß For form A output drive the thread must correspond with thread of the valve stem. If not
ordered explicitly with thread, the stem nut is supplied unbored or with pilot bore (Figure C).
For machining the stem nut refer to Section 13.
ß Form B output drives are normally supplied with bore and one keyway (Figure D).
Check whether bore and keyway correspond with the input shaft of the valve or gearbox.
Degrease mounting surfaces at actuator and valve/gearbox thoroughly.
Apply lubricant to input shaft of the valve/gearbox.
Place actuator on the valve/gearbox and use bolts with a minimum quality of 8.8 to fasten. Tighten
diagonally.

Related Models:

Company Introduction:
Achievers Automation Limited has more than 10 years experience in the market of Industrial Automation, specialized in reselling factory sealed Probe, Sensor, DCS,isolator barrier, HMI, PLC,Adapter,Profibus connector and cable from Brands as BENTLY NEVADA, Endress+Hauser, YOKOGAWA,MTL,Allen-Bradley, Pepperl+Fuchs,Rosemount, ASCO, Schneider, Lenze, Pro-face, Mitsubishi, Omron, Lenze, Delta, Honeywell, Siemens and etc. If you have any request, please do not hesitate to contact us.

FAQ of Achievers
Q:Are the Products Genuine OEM Units?
A: These items have been certified by Achievers Automation Limited to be genuine OEM Units obtained through OEM or independent third-party channels.
Q:How will you arrange shipment?
A: We can arrange shipment based on your request. We have cooperated forwader who can arrange shipment via FedEx, DHL,TNT with good price.
Q:What is the warranty of goods?
A: One-year Warranty.