Endress Hauser Proline Promag P 200 electromagnetic flowmeter5P2B1F-AAACCAEA1K0A

Promag P is dedicated to chemical and process applications with corrosive liquids and high medium temperatures. With genuine loop-powered technology, Promag P 200 enables cost-effective and seamless integration into existing infrastructures. It offers highest operational safety in hazardous areas thanks to its intrinsically safe design (Ex ia). Heartbeat Technology enables process safety at all times.

Potentiometric

Measuring principle
Electromagnetic

Product headline
The flowmeter for highest medium temperatures with genuine loop-powered technology.
Dedicated to chemical and process applications with corrosive liquids and high medium temperatures.

Sensor features
Diverse applications – wide variety of wetted materials. Energy‐saving flow measurement – no pressure loss due to cross section constriction. Maintenance‐free – no moving parts.
Nominal diameter: max. DN 200 (8"). All common Ex approvals. Liner made of PTFE or PFA.

Transmitter features
Convenient device wiring – separate connection compartment. Safe operation – no need to open the device due to display with touch control, background lighting. Integrated verification – Heartbeat Technology.
Loop-powered technology. Robust dual-compartment housing. Plant safety: worldwide approvals (SIL, Haz. area).

Nominal diameter range
DN 15 to 200 (½ to 8")

Wetted materials
Liner: PFA; PTFE
Electrodes: 1.4435 (316L); Alloy C22, 2.4602 (UNS N06022); Tantalum; Platinum

Measured variables
Volume flow, mass flow

Max. measurement error
Volume flow: ±0.5 % o.r. ± 2 mm/s (0.08 in/s)

Measuring range
4 dm3/min to 1100 m3/h (1 to 4850 gal/min)

Max. process pressure
PN 40, Class 300, 20K

Medium temperature range
Liner material PFA: –20 to +150 °C (–4 to +302 °F)
Liner material PTFE: –40 to +130 °C (–40 to +266 °F)

Ambient temperature range
Flange material carbon steel: –10 to +60 °C (+14 to +140 °F)
Flange material stainless steel: –40 to +60 °C (–40 to +140 °F)

Sensor housing material
AlSi10Mg, coated

Transmitter housing material
AlSi10Mg, coated

Degree of protection
IP66/67, type 4X enclosure

Display/Operation
4‐line backlit display with touch control (operation from outside)
Configuration via local display and operating tools possible
Remote display available

Outputs
4‐20 mA HART (passive)
Pulse/frequency/switch output (passive)

Inputs
None

Digital communication
HART, PROFIBUS PA, FOUNDATION Fieldbus

Power supply
DC 18 to 35 V (4‐20 mA HART with/without pulse/frequency/switch output)

Hazardous area approvals
ATEX, IECEx, cCSAus, NEPSI, INMETRO, EAC, JPN, UK Ex

Other approvals and certificates
Product safety
CE, C-Tick

Functional safety
Functional safety according to IEC 61508, applicable in safety-relevant applications in accordance with IEC 61511

Metrological approvals and certificates
Calibration performed on accredited calibration facilities (acc. to ISO/IEC 17025)
Heartbeat Technology complies with the requirements for measurement traceability according to ISO 9001:2015 – Section 7.1.5.2 a (TÜV SÜD attestation)

Pressure approvals and certificates
CRN, PED

Material certificates
3.1 material

Hygienic approvals and certificates
Drinking water approvals: ACS, NSF 61