12v 150ah agm battery FT sealed Deep Cycle Lead acid Battery Solar Battery
What are the characteristics of the front terminal battery?
The simple safety factor is easy to maintain and maintain. The output resistance and output resistance of the amplifier can also be applied randomly, which can be handled reasonably, reduce the difficulty coefficient of multi structure single series processing of single connected terminal battery, improve the total area and quality of single connected battery, and improve the reliability of single connected cell combination process.
> Main Features
1. Excellent safety performance:No electtolyte leakage,battery swelling and cracking under normal use.
2. Good discharging performance : with smooth discharging voltage and mild discharging platform.
3. Good resistance to overdischarge:In temperature of 25 degrees celsius, the fully charged battery discharges with fixed resistance which is equivalent to the one required by 1ca discharge of the battery for three weeks, and it can restore capacity over 75%.
4. Good resistance to overcharge:The fully charged battery is proved to maintain normal open circuit voltage and be without leakage or batteries swelling or cracking in temperature of 25 degrees celsius after charging at 0.1ca for 48 hours, and the capacity maintain over 95%.
5. Good resistance to high current:The fully charged battery is proved to be without conductive part melted or any appearance deformation after discharging at 2ca for 5 minutes or 10ca for 5 seconds.
1. Used for communication power supply (access network, micro cellular base station, mobile, 3G technology, etc.)
2. Power supply system of private or local area network
3. Access network equipment of communication system
4. UPS, EPS and other standby power supplies
Battery Model No. | FBR12-150FT | |
Nominal Voltage | 12V | |
Capacity | 20HR(10.5V) | 150Ah |
(25ºC) | 10HR(10.5V) | 132Ah |
1HR(9.6V) | 90Ah | |
Dimension | Length | 551±2mm |
Width | 110±2mm | |
Height | 297±2mm | |
Total height | 297±2mm | |
Approx. Weight | 48.5kg±4% | |
Terminal type | F13 | |
Internal resistance(Fully charged,25ºC) | Approx 4.2mΩ | |
Capacity affected by | 40ºC | 102% |
Temperature(20HR) | 25ºC | 100% |
0ºC | 85% | |
-15ºC | 65% | |
Self-discharge(25ºC) | 3month | Remaining Capacity:91% |
6month | Remaining Capacity:82% | |
12month | Remaining Capacity:65% | |
Nominal operating temperature | 25ºC±3ºC(77ºF±5ºF) | |
Operating | Discharge | -15ºC-50ºC(5ºF-122ºF) |
temperature range | Charge | -10ºC-50ºC(14ºF-122ºF) |
Storage | -20ºC-50ºC(-4ºF-122ºF) | |
Float charging voltage (25ºC) | 13.6 to 13.8V Temperature compensation:-18mV/ºC | |
Cyclic charging voltage (25ºC) | 14.5 to 15V Temperature compensation:-30mV/ºC | |
Max charging current | 45A | |
Max discharging current | 1200A(5sec.) | |
Designed floating life(20ºC) | 12years |
Component | Positive plate | Negative plate | Container | Cover | Separator | Electrolyte | Safety valve | Terminal |
Raw material | Lead dioxide | Lead | ABS | ABS | AGM | Sulfuric acid | Rubber | Copper |
F.V/Time | 10min | 15min | 30min | 60min | 2h | 3h | 4h | 5h | 8h | 10h | 20h |
9.6V | 262 | 202 | 121 | 74.2 | 43.8 | 31.2 | 25.2 | 21.5 | 14.8 | 12.2 | 6.47 |
9.9V | 254 | 197 | 118 | 73 | 43.6 | 31 | 25.1 | 21.4 | 14.7 | 12.2 | 6.46 |
10.2V | 243 | 190 | 115 | 71.2 | 43.2 | 30.8 | 24.9 | 21.3 | 14.6 | 12.2 | 6.44 |
10.5V | 233 | 183 | 112 | 69.7 | 42.6 | 30.6 | 24.7 | 21.1 | 14.5 | 12.1 | 6.4 |
10.8V | 220 | 173 | 108 | 67.6 | 41.5 | 29.7 | 24 | 20.5 | 14.1 | 12 | 6.36 |
>Constant Power Discharge Characteristics(Watt,25ºC)
F.V/Time | 10min | 15min | 30min | 60min | 2h | 3h | 4h | 5h | 8h | 10h | 20h |
9.60V | 2825 | 2214 | 1353 | 845 | 508 | 367 | 297 | 255 | 176 | 146 | 77.7 |
9.90V | 2741 | 2160 | 1326 | 833 | 505 | 365 | 295 | 253 | 175 | 146 | 77.5 |
10.2V | 2628 | 2081 | 1285 | 812 | 500 | 362 | 293 | 251 | 174 | 145 | 77.3 |
10.5V | 2514 | 2010 | 1254 | 795 | 493 | 360 | 291 | 250 | 172 | 144 | 76.9 |
10.8V | 2373 | 1904 | 1208 | 770 | 480 | 349 | 282 | 242 | 167 | 143 | 76.3 |