12Volt 6.5Ah Dry Charged lightweight motorcycle battery
>Product Features
Lawn Mower Rechargeable Lead Acid Battery
1. Pb-Ca alloy battery plate grid, low water loss and low self- discharge rate.
2. Low internal resistance, good high rate discharge performance.
3. Flooded electrolyte, high resistance against over- charge/discharge.
4. Excellent high & low working temperature performance (-30"C to 55C).
5. Design float service life: 3-5 years.
Battery Model No. | 12N6.5-3B | |
Nominal Voltage | 12V | |
Capacity(10HR/25℃) | 6.5Ah | |
Dimension | Length | 138mm |
Width | 74mm | |
Height | 110mm | |
Approx. Weight | 2.50kg | |
Operating temperature range | -20℃-50℃(-4℉-122℉) | |
Standard charging method(25℃) | Current | 0.65A |
Time | 5-10h | |
Quickly charging method(25℃) | Current | 3.25A |
Time | 1H | |
Terminal Material | Lead | |
Container Material | ABS |
Component | Pos. plate | Neg. plate | Container | Cover | Separator | Electrolyte | Safety valve | Terminal |
Raw material | lead dioxide | lead | ABS | ABS | AGM | Sulfuric acid | Rubber | Copper |
Payment Terms | T/T | EXW | 30% in advance for deposit payment, the balance payments will be paid before shipment. | |
FOB | ||||
CFR/C&F | 30% in advance for deposit payment, the balance will be paid against copy of B/L | |||
CIF | ||||
L/C | For the amount of one shipment above 50,000 usd, L/C at sight is acceptable. | |||
West Union | For the amount less than 5000 usd | |||
Paypal | ||||
Delivery Time | 7~25 days after receiving the payment or the deposit payment |
Can be stored for a long time period and no need to recharge during storage .
Battery left-over capacity can be as high as 70% after being stored for 1 year and can be restored to 85% of its full capacity
when fully recharged.
This battery can be restored to 80% of its full capacity while others only being rendered to failure because of the sulfuration of the
sulphur-acid and its consequent maintenance, after subject to long period of repeated over -discharging due to frequently engine igniting,
lighting and insufficient charge for the battery caused by short distance driving and low speed.
Being charged at 16V(not recommended ,though),this battery can be as high as 95% of its full capacity, no drying up in the electrolyte due to
little gas releasing and all released gas being absorbed by the plates, while this kind of sealed lead-acid battery usually being charged by a
external 14.8V charger which being designed with different emphasis between amperage and voltage(because the charge voltage for flooding
lead acid battery is usually at 16V,so the prevalent charge voltage is 16V),it will be soon rendered useless caused by drying out of the
electrolyte if the ordinary battery being charged by a 16V external charger.
This battery can quickly absorb the momentary charging energy generated by vehicle _borne generator and braking, testing date shows that
it can absorb 70% of the energy released while others only 40%,after being charged under this kind of condition for 1 hour.
Small in internal resistance and self-discharge, normal temperature starting discharge multiple rates can be as high as 8C20 while other
ordinary battery can only reach 6C20,so this battery can be used to substitute high power battery.
This battery's life span is twice as long as ordinary battery's due to its slow capacity attenuate rate under repeated deep discharge cycles.
The consistency and balanced discharge performance rendered special match for battery working group unnecessary and only need to
replace the damaged one in case there is any, thus speeding the responsiveness of post sale service.
>Application