Undercoat Rust Proof Corrosion Rubberized Undercoating free sample

Art No. C3001

Application:

A permanently elastic, rubber and special resin combination undercoating for corrosion protection and sound deadening.

Permanently protects automotive undercarriages, door skins, trunks, wings, wheel wells, and floor panels against corrosion from stone chips, road salt and moisture. Also deadens droning noises from the engine bay, door shells, luggage compartments and other hollow sections. Fast drying, may be over-painted when fully dry. Product can be applied over bare metal or primer.

Features:

1. Good elasticity

2. Strong adhesion

3. Strong flexibility

4. Insoluble in water

5. form a durable protective layer on the car chassis against being rusted and eroded.

Packing Details:

Usage

1. First, you should clean thoroughly the chassis or want to spray parts, up to clean, no water, no oil, no traces of wax and no rust.Let the spray part of the natural dry or dry.

2. Remove the wheel, rubber sheet, lift the vehicle to cover the parts that do not need to be sprayed (such as car body, exhaust pipe, engine water tank, spring, air conditioning condenser, etc.) to avoid the trouble of cleaning after spraying.

3. Fully shake the product for 2 minutes so that the material in the tank can be mixed evenly,Aand than open the tank cap.

4. Spray evenly back and forth from the spray surface 25-50cm. In order to prevent flow marks and sagging, it can be divided into two or more spraying, usually waiting for 15min or so, touch the surface when it was dry can spray again.

5. After spraying, wait fot the surface drying.And then you can assemble the piece, restore the original state of the vehicle.

6. A car should be used at least 4kg, if you want to strengthen the effect, may be appropriate to increase the amount, but the thickness of not more than 3mm for the degree.