LED Flexible Strips Light DC12V Epistar SMD5050 RGB IP65 Waterproof 30LED 60LED

1. Products Specification:

2. Application:

1. Light up colorful home life ,DIY household lights for hallways, stairs, trails ,windows,

2. Light up colorful life hotels decoration use,Theaters, clubs, shopping malls, festivals and performances

3. Architectural decorative lighting,Archway, canopy and bridge edge lighting, Security lighting and Emergency,

4. Extensively applied in Backlighting for signage letters, concealed lighting and advertisement sign lighting

5. Applicable for automobile & Airplane model decoration, contour lighting or border.

3. Description:

RGB LED Strips need a power supplier and a 24key/44 keys RGB controller to control the led strips, use the controller, you can change everycolor you want. It use SMD 5050 RGB led chips, also SMD3014 RGB LED Chips. SMD5050 RGB LED Strips have 2 model, one model is 30pcs led chips per meter, another is 60pcs led chips per meter. So the power is different. One is 7.2W per meter, another is 14.4W per meter. Both 2 types voltage is DC12V, can make IP20 non waterproof, only can use indoor. And IP65, IP67 and IP68 are waterproof, which can use for outdoor lighting.

4. Advantages:

1. Waterproof flexible LED strip (IP65 Waterproof level)

2. Superbright 5050 SMD RGB LED, high intensity and reliability

3. Maintenance free, easy intallation

4.60 SMD RGB LEDs per meter, total 300 LEDs for 5 meters

5. Adhesive backing tape for secure and easy application to most surfaces

6. Every 3-LED cutable without damaging the rest strip

7. Ultra-bright but running at low temperature

8. Flexible ribbon for curving around bends

5. Operating instruction for RGB LED Strip:

5.1. Specification for power supply:

Supply voltage:110-220VAC / 50-60HZ

Output voltage: DC12V

Output power: 5A/60W 2A/24W

Product Size: 145*65*85mm

Output: 3 channels RGB signal

Max load: 5 meters

Working temperature: -20~60℃

Control mode: Infrared remote controller

5.2. The 24 key infrared remote controller for use:

5.3. 24 Key RGB controller Description:

1. When the static, “ Brightness+ ” “ Brightness- ” to adjust the brightness of colors.

2. Dynamic time, “ Speed+ ” “ Speed- ” to adjust the speed of change, to facilitate debugging, is only divided into “high speed” “medium speed” “slow speed” “slowest” total four kinds of speed.

3. Dynamic static free to switch, and has a memory function, you can save the state before power.

5.4. 24 Key RGB Controller Function:

1. In constant power, press the OFF button and then press the ON key, the controller can remember the previous state of the LED

2. After lighting in LED, turn off the power 30S, and then turn on the power, the controller can remember the previous state of the LED

3. After lighting the LED, turn off the power, and then turn on the power, the controller will automatically enter the next state.