Adss Opgw Down Lead Clamp Opgw Down Lead Clamp Adss Opgw Rubber Down Lead Clamp
Description
Function of leading dowm clamp components: the clamp is mainly used for fixing and installing of the ADSS/OPGW cable when lead wire to the
pole to avoid the cable friction with the pole or others in the wind and protect the cable. For example, on the cable joint pole, the clamp fix the
cable from the clamping hardware to the installation location of consecutive protection box; or the clamp fix the cable leading from the pole down to
the pipes underground, cable channel, direct burial and plant room. We provide with the following types: tower type of leading down clamp and
pole type leading down clamp.
Type: stainless steel
Function: fix the cable leading up or down to the pole, so the cable can not jitter and then avoid the wear of the cabel.
Using condition: the head and tail ends of the cable circuit or consecutive pole.
Application
It is installed to down-lead or jump-joint cables on terminal tower /pole or splice joint tower/pole. it was commonly installed every 1.5- 2m / set.
Features
• Install easily
• Proper spacing and hold strength without damage to the cable
• Easy, quick and reliable to install
• Large range to regulate
Specification
two models optional: 10-14mm and 13-17mm.
materials: Parallel groove damp— ageing-resistant rubber or aluminum alloy
Stainless steel hoop—Aluminum alloy support — Galvanized U-shaped steel
Packing & Shipping