MachineU > China Products > Electrical Equipment & Supplies > Wires, Cables & Cable Assemblies > Electrical Wires
ADSS All Dielectric Self Supporting Aerial Cable GYFTCY83 Anti Rodent Application
ADSS All Dielectric Self Supporting Aerial Cable GYFTCY83 Anti Rodent Application
ADSS All Dielectric Self Supporting Aerial Cable GYFTCY83 Anti Rodent Application
ADSS All Dielectric Self Supporting Aerial Cable GYFTCY83 Anti Rodent Application
ADSS All Dielectric Self Supporting Aerial Cable GYFTCY83 Anti Rodent Application
ADSS All Dielectric Self Supporting Aerial Cable GYFTCY83 Anti Rodent Application
Specifications
Brand Name :
ZXOFC
Model Number :
ZXOFC-GYFTCY83
Certification :
CE,ISO9001,ROSH
Place of Origin :
ShenZhen,China
MOQ :
5KM
Price :
Negotiable
Payment Terms :
T/T, Western Union,Paypal,Credit card
Supply Ability :
10000KM per month
Delivery Time :
1-2 weeks according to the lengths
Packaging Details :
Plywood drum or Iron wooden drum or Fumigated wooden drum or Cardboard box (mainly for FTTH cable) Optional
MAT :
1000N-4000N
Span :
50-200meter
Jelly :
Gel or Gel-free for optional
Fiber count :
2-288 core
Structure :
Stranded Loose tube
Central strength Member :
FRP
Application :
Aerial,direct buried,duct
Material :
AT or PE
Description

GYFTCY83 All dielectric Self-supporting ADSS fiber optic cable used for aerial anti-Rodent application

Description

The structure of the optical cable is to insert a 250 μm optical fiber into a loose tube made of a high modulus material, and the loose tube is filled with a waterproof compound. The center of the core is an FRP non-metallic reinforcement. The structure needs to be in the outer layer of the MDPE material. The sleeve is twisted around the center to form a compact and round core. The gap in the core is filled with water. The material is covered with a water blocking tape, and a layer of FRP stranded wire is coated on the outside, and a layer of LSZH low-smoke halogen-free PE sheath is extruded to form a fiber optic cable.

Cable Cross-section diagram

ADSS All Dielectric Self Supporting Aerial Cable GYFTCY83 Anti Rodent Application

Technique Parameters

Category Description Specifications
G.652D
Optical Specifications Attenuation @1310nm ≤0.36dB/km
@1550nm ≤0.22dB/km
Attenuation discontinuity ≤0.05 dB
Attenuation vs. Wavelength @1285~1330nm ≤0.05 dB/km
@1525~1575nm ≤0.05 dB/km
Zero Dispersion Wavelength 1300~1324nm
Zero Dispersion Slope ≤0.092ps/(nm2.km)
Dispersion @1310nm ≤3.5 ps/nm.km
@1550nm ≤18 ps/nm.km
Polarization Mode Dispersion(PMD) ≤0.2ps/km1/2
Cable Cutoff Wavelength(λcc) ≤1260nm
Effective Group Index of Refraction @1310nm 1.4675
@1550nm 1.4681
Macro bend loss (30mm radius,100turns) 1625nm ≤0.1 dB
Geometric
Specifications		 Mode Field Diameter @1310nm 9.2±0.6μm
@1550nm 10.4±0.8μm
Cladding Diameter 125±1μm
Cladding Non-Circularity ≤1.0%
Coating Diameter 245±7μm
Coating/Cladding Concentricity Error ≤8μm
Core/Cladding Concentricity Error ≤0.8μm
Mechanical
Specifications		 Proof Test level ≥1.0%
Fiber Curl Radius ≥4.0m
Peak Coating Strip Force 1.3~8.9N

Cable type ADSS-24B1 ADSS-48B1
element -- 6 6
Central Strength Member Material Fiberglass Reinforce with Plastic (FRP)
Loose Tube Material Polybutelene Terephthalate (PBT)
Diameter Nom.2.1 mm Nom.2.3 mm
-- 4 Fibers per Tube 8 Fibers per Tube
Filling compound in loose tube Material Thixotropic jelly
Inner Sheath Material Black MDPE
Thickness Nom.0.9 mm
Strength Member Material Aramid yarns
Outer Sheath Material HDPE
Thickness Nom.1.7 mm
Span m 100 150 250 100 150 250
Overall Diameter mm 12.0 12.0 12.1 12.6 12.7 12.8
Weight kg/km 98 98 100 110 111 114
Max.Tensile strength N 2000 2200 3200 2250 2450 3550

3.2 Fiber coding,The color coding of the optical fiber shall be in accordance with Table 3.2.1

No. of fiber 1 2 3 4 5 6
Color of fiber Blue Orange Green Brown Slate White
No. of fiber 7 8 ／ ／ ／ ／
Color offiber Red Black ／ ／ ／ ／

Table3.2.2:Identification of optical tube

No. of tube 1 2 3 4 5 6
Color of tube Blue Orange Green Brown Slate White

Table3.2.3:Make-up of cable, No. of Fibers in each Tube

No.of Fibers No.of Tube 1 2 3 4 5 6
24B1 6 Tube color Blue Orange Green Brown Slate White
No. of fiber 4 4 4 4 4 4
48B1 6 Tube color Blue Orange Green Brown Slate White
No. of fiber 8 8 8 8 8 8

4. TEST REQUIREMENTS

No Item Test standard Method Acceptance criteria
1

Tensile

test

 IEC-60794-1-E1

-Max. Tensile strength

-Sample length:50 meters

-Time: 1minutes;

-Fiber strain at maximum

Load: max. 0.33%

-Attenuation increase≤0.10dB
2

Crush

test

 IEC-60794-1-E3

-Load:2200N

-Time: 1 minutes

-Length: 100mm

-No splits or cracks in the

outer jacket;

-Attenuation increase<0.10dB,
3

Impact

test

 IEC-60794-1-E4

-Impact energy: 450g

- Height:1 meter

-Impact points: min.1

--Number of impacts: 5

-No splits or cracks in the outer jacket

-Attenuation increase≤0.10dB(after the test)
4

Torsion

test

 IEC-60794-1-E7

-1m cable length with 150N weight

-±180°, 10 cycles

- No splits or cracks in the outer jacket

-Attenuation increase ≤0.10B
5 Repeated bending IEC-60794-1-E6

-R=20×cable outer diameter

-1m cable length with 150N weight,30 cycles

- No splits or cracks in the outer jacket

-Attenuation increase ≤0.10dB(after the test)
6 Temperature cycling test IEC-60794-1-F1

-Temperature step: +20℃→-40℃→+70℃→-40℃→+70℃→+20℃

-Time per each step: 12 hrs

-Number of cycles: 2 cycles

 -Attenuation variation for reference value(the attenuation to be measured before test at +20±3℃) ≤0.10dB,
7 Water penetration test IEC-60794-1-F5

-Water height: 1m

-Sample length:3m

-Duration of test: 24hrs

 -No water leakage at the end of the sample
8 Drip test IEC-60794-1-E14 -Five 0.3m samples suspended vertically in a climate chamber, raised temperature to +70℃ -No filling compound shall drip from tubes after 24 hr

Features:

  • Suitable for use on distribution and high voltage transmission lines
  • Requires no messenger wire -- fully self-supporting
  • Single pass installation -- no messenger, no lashing wire -- faster and lower cost
  • Cable is water-blocked using dry core technology, therefore no messy flooding compounds
  • Design details for span lengths up to 1500ft (457m) and fiber counts up to 432
  • Custom designs available for larger span lengths or other fiber counts
  • Full line of attachment hardware available for a "system" solution
  • Track-resistant outer jacket available for installations on high voltage lines where space potentials reach up to 25kV
  • Gel-filled buffer tubes are S-Z stranded for easy mid-span access

Application

  • Utilized for telecommunications by power utilities, telcos, and private network groups
  • Designed for installation on distribution and transmission lines
  • Capable of being installed in close proximity to conductors if security is a concern
  • Suitable for underbuild applications, minimizing the need for outages
  • Used for telecom networks where quick, low-cost installation is a priority
Our services
ADSS All Dielectric Self Supporting Aerial Cable GYFTCY83 Anti Rodent Application
Our Certificate
ADSS All Dielectric Self Supporting Aerial Cable GYFTCY83 Anti Rodent Application
Package and delivery
ADSS All Dielectric Self Supporting Aerial Cable GYFTCY83 Anti Rodent Application
ADSS All Dielectric Self Supporting Aerial Cable GYFTCY83 Anti Rodent Application
Package:
Standard Wooden Drum With Protection.
Standard reel length:2/3/4/5km/reel,other length is also available
Shipping
For the large order , we usually ship the cable by sea .
For small order , we can ship them by sea (LCL) or by air /by exress
(DHL,UPS,FEDE or TNT..) as your request .
FAQ

1. Are you the real factory?

Yes,we are the real factory with 20 years’ history.

2. What is your fiber brand?

Fiber brands including :ZXOFC

3. What is your main products?

Outdoor fiber optic cables; indoor fiber optic cables;FTTH Drop cables; ADSS;

Indoor armored patch cords fiber cable; Optical patch cords SC/LC/FC/ST; MTP/MPO optical patch cord.

4. Product quality guarantee period?

25 years’ Guarantee for fiber optic cable

5. Do you have certificate for raw material?

We build long-term relationship cooperation with qualified ISO9001, ROHS raw material suppliers.

6. What is your delivery time?

Within 24 hours for 30KM normal kinds of fiber optic cable;

1 ~2 days for fiber optic patch cords with 10000 connectors.

7. MOQ: what is your minimum quantity?

MOQ for fiber optic cables: 1KM

There is no MOQ required for fiber optic patch cords,as there’s stock for normal kinds.

8. Do you have distributor in other country or domestic?

Until now, we sell our products to customers directly. And factory price could be offered.

9. Payment

For large orders: T/T by advanced deposit

For small orders: T/T,Western Union and Paypal are acceptable.

10. Shipping & Delivery

For large orders: by sea (LCL or FCL)

For small orders: by sea (LCL), by air or by courier services,any of which is optional.

Product tags

4g external antena fixing

,

rodent resistant cable

,

anti rodent fiber optic cable
Send your message to this supplier
Send Now

ADSS All Dielectric Self Supporting Aerial Cable GYFTCY83 Anti Rodent Application

Ask Latest Price
Product Detail
Brand Name :
ZXOFC
Model Number :
ZXOFC-GYFTCY83
Certification :
CE,ISO9001,ROSH
Place of Origin :
ShenZhen,China
MOQ :
5KM
Price :
Negotiable
Contact Supplier
ADSS All Dielectric Self Supporting Aerial Cable GYFTCY83 Anti Rodent Application
ADSS All Dielectric Self Supporting Aerial Cable GYFTCY83 Anti Rodent Application
ADSS All Dielectric Self Supporting Aerial Cable GYFTCY83 Anti Rodent Application

Shenzhen Zhaoxian Special Optical Fiber Cable Technology Co., Ltd.

Active Member
6 Years
guangdong, shenzhen
Since 2005
Business Type :
Manufacturer, Importer, Seller
Main Products :
ADSS Optical Cable, OPGW Fiber Cable, Duct Fiber Optic Cable
Total Annual :
10000000-50000000
Employee Number :
50~99
Certification Level :
Active Member
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products Self Supporting Aerial Cable
MachineU China Products Electrical Equipment & Supplies Wires, Cables & Cable Assemblies Electrical Wires
Contact Supplier
Submit Requirement