Automatic Aerosol Fire Suppression System For Engine Room Fire Protection

FireLess 2.0 Application for engine rooms of buses

The fire reasons of engine rooms

The engine room is one of most important component for a bus. But the environment of engine room is complex and have many risks of fires.

• Electrical fault causes

With the development of automotive technology, the total length of electrical circuits used in various control devices and transmission devices in the car has increased tenfold compared to 20 years ago, and many wiring harnesses are placed in the engine compartment and the instrument panel. These harnesses run directly through the entire body and are fixed by various clamps and then inserted into a relatively narrow space, so they are often affected by the heat, vibration and shaking of the running engine, although they are protected by cushioning materials or protective covers. The insulation layer is still very easy to damage. After the insulation layer is damaged, it is easy to cause a short circuit. Besides, electrical faults such as overcurrent and poor contact caused by the electrical circuit or electrical equipment in the vehicle are also important causes of vehicle fire.

• The failure of the oil circuit system

Mainly fires are caused by aging, cracking, falling off, burning, etc. of the fuel pipe.

• A failure in the exhaust system caused a fire.

During the operation of the vehicle engine, the exhaust system emits a large amount of heat, and the exhaust pipe and other components are always in a high temperature state. Once the combustible material comes into contact with it, it may cause a fire.

Why choose FireLess 2.0?

FireLess 2.0 condensed aerosol fire extinguishing system is a better choice to protect the engine rooms. Small volume and compact design make it particularly suitable the narrow, complex and harsh environment. The sealed shell can prevent any external dirties into the fire extinguishing devices and can not affect its functions and performances. Different starting methods make it more flexible and accommodate to the different requirements of clients and customers.

And the most important thing is that to extinguish fire very rapidly. FireLess 2.0 discharge time is at most 6s, so the fires can be controlled and extinguished in few seconds. And the fire extinguishing gas shall be filled with the whole space with 30 minutes. The flame can not burn up again.

Because fire extinguishing gas will disappear as time goes by. There is no residual fire extinguishant left, so the equipment will not damage the equipment in the second time and fire place is easy to clean and protect the things utmost.

Technical parameters:

HD-101 Heat Sensitive Self-starting Element Technical parameters: