Fire Fighter Throw Type Fire Extinguisher Portable Fire Extinguisher

The specification information

Product features

1.With high fire extinguishing efficiency, strong inhibition capability and fast fire extinguishing speed;

2. Total flooding fire extinguishing, with full coverage and zero-impeding;

3. The device is light weight, small size, portable, flexible, and easy to use;

4. Fire extinguishing agent is non-toxic and harmless, which is scientific and environmentally friendly.

5.The side is 360 degree annular porous nozzle, and is sealed with labels. It is the diversion nozzle for extinguishing agent.The right end is the start delayer interface.

Device structure

The fire extinguishing device is composed of a disc tank, a delay starting device.

Notes:When storing and transporting, the delay starting device should be screwed down and plugging plug holes with stoppers.

Starting mode

The fire extinguishing device is activated by a delay starting device. The user should throw out the fire extinguishing device within 6-8s.

Working principles of device

When fire is happening, the fire extinguishing device is started through delay starting device. The fire extinguishing device discharge subnanometer particles called gray-blue smoke-like aerosols into protection area, which is evenly spread in the protective space to suppress combustion process. Meanwhile subnanometer particles have a large number surfaces can absorb heat, the flame temperature is cooled down quickly and fire is extinguished by continuous and repeated physical and chemical actions.

Good helper for fire fighters

When a fire occur in a enclosed and dangerous place where is difficult for fire fighters to approach and rescue, FireLess 100( Thrown type) would be a good helper for saving properties at this moment. Because the aerosol of FireLess can cool the fire zone temperature down very quickly, and put out the fires in very short time. The rescue difficulty is reduced. Especially for the chemical industries.

The Benefits of Aerosol Fire Suppression

As there is no pressure increases, equipment such as pressure relief dampers is not required.

For the same reason there is no need to conduct an annual ‘Room Integrity Check’ to test the airtight integrity of the room – this saves you hundreds of pounds each year.If the system is activated it is very quick and inexpensive to replace the aerosol units – they only contribute a relatively small part to the cost of the system.