Disposable Virus Sampling Tube

Structure Composition

The product consists of swab and tube containing preservation solution. Non sterile. The material of sampling tube body is PP, the material of cap is PE, the material of swab rod is ABS, and the material of swab head is nylon

Sampling Tube

• The sampling tube body is transparent, the surface is smooth, and the label is clear and complete.
• The pipe body has no stain, obvious scratch, crack, even thickness of pipe wall, no obvious bending and deformation; The cap fits well with the pipe body and rotates tightly without skew cover

Preservation Solution

• Liquids should be odorless, tasteless, without visible particles or impurities. No turbidity may occur. Foam or bubbles are normal phenomena during transportation and use.
• The standard range of pH value is 7.0-8.5
• The storage capacity is:1ml,1.5ml,2ml,2.5ml,3ml,3.5ml,4ml,5ml,6ml,7ml,8ml,9ml,10ml,12ml,15ml,20ml,25ml, Tolerance ±10%

Sampling Swab

Intended Use

It is suitable for collection, preservation and transportation of samples from nasal cavity and oropharynx

Applicable Departments

Fever clinic, emergency department, laboratory, infection control department

Usage Method

• Before sampling, clean hands, tear open the outer package of the swab, take out the swab, and pay attention not to touch the swab head.
• According to different sampling requirements, swabs were used to collect samples from corresponding parts.
• After sampling, quickly put the swab into the collection tube with preservation solution to avoid contacting other parts.
• Break the swab rod, discard the tail, and then tighten the tube cover to complete sampling.
• The sampled virus samples should be placed and stored by the Management Commission, and transported to the testing department for testing within one week.

Matters Needing Attention

• Confirm that the outer package of the product is in good condition, check the preservation tube, and confirm that there is no leakage.
• This product is for one-time use, no second use.
• The process of sample collection should be considered as a potential risk of infection, and the operation and treatment should meet the requirements of relevant laws and regulations.
• After use, the product should be disposed according to the relevant regulations of medical waste.

Important

• Make sure that the top of the sampling swab does not touch any surface before sampling.
• Choking risk, sampling swabs inserted into the mouth should be careful.
• After the collection of pathogenic bacteria, the disposable swab should be completely inserted into the preservation solution to maximize the retention of pathogenic bacteria.
• After use, the tubes and swabs should be disposed of according to the relevant medical waste treatment methods

Company profile