Disposable Vacuum Blood Collection Container Structure Composition

Structure composition

The single-use vacuum blood collection container is composed of test tube, stopper, lid, label and additives (if any) and add-ons (if any)

additive

Sodium citrate 9:1, sodium citrate 4:1, heparin sodium, heparin lithium, heparin lithium/separation gel, coagulant/separation gel, coagulant, EDTAK2, heparin sodium/sodium fluoride, EDTAK2/separation gel , EDTAK3, EDTAK3/ separation gel, heparin sodium/separation gel, no additives

Scope of application

Used in conjunction with a disposable venous blood collection needle for the collection, transportation and storage of human venous blood

Identification of blood vessels and additives

1. Position the sampled person's arm downwards, select the venipuncture position, apply a blood sampling belt, and disinfect the venipuncture site;
2. Unscrew the lancet sheath, and perform venipuncture with the arm down and the end of the collection tube cap up;
3. The other end penetrates the diaphragm of the rubber stopper to prevent side penetration and avoid premature loss of negative pressure.
4. Once the blood enters the blood collection tube, immediately release the blood collection belt. After the collection is completed, the blood collection needle is drawn out of the vein, and the puncture site is compressed with a disinfectant product to stop bleeding.
5. Immediately after the blood collection is completed, shake the blood collection tube upside down 5 times; place it for observation.
6. Place the disposable vacuum blood collection container after use in the special recovery device.

Storage requirements

Store in a dry, well-ventilated, clean warehouse with a relative humidity of no more than 80%, no corrosive gas

matters needing attention

1. This product is a one-time use product;
2. If the tube body is damaged or the plug is loose, it is prohibited to use it;
3. Vacuum blood collection tubes containing anticoagulant should be gently inverted and mixed 5-8 times after blood collection to ensure complete fusion of anticoagulant and blood sample;
4. The vacuum blood collection tube containing coagulant or separating gel is placed upright after blood collection, and the serum is separated by centrifugation after the blood is completely coagulated;
5. In high-altitude areas, please use special vacuum blood collection tubes for high-altitude areas;
6. The use of the product should meet the requirements of the relevant operating specifications of the medical department, and it is limited to trained medical staff.

Company Profile