Disposable Vacuum Blood Collection Container Identification Of Blood Vessels And Additives

Structure composition

The disposable vacuum blood collection container consists of a test tube, a plug, a lid, a label, and additives (if any) and additions (if any)

Additive

Sodium citrate 9:1, Sodium citrate 4:1, Heparin sodium, lithium heparin, lithium heparin/separation glue, coagulant/separation glue, coagulant promoter, EDTAK2, heparin sodium/sodium fluoride, EDTAK2/ separation glue, EDTAK3, EDTAK3/ separation glue, heparin sodium/separation glue, no additives

Scope of application

Used together with disposable venous needle, it is used for the collection, transportation and storage of human venous blood

Identification of blood vessels and additives

1. Select the venipuncture site from the downward position of the sampled person's arm, apply the blood collection tape, and conduct disinfection on the venipuncture site;

2. Unscrew the sheath of the blood collection needle, and puncture the vein with the arm down and the cap of the collection tube up;

3. The other end penetrates the diaphragm of the rubber plug to prevent side penetration and avoid premature loss of negative pressure.

4. Once the blood enters the blood collection vessel, the blood collection belt should be released immediately. After the collection is completed, the blood collection needle should be extracted from the vein, and the puncture site should be compressed with disinfection products to stop the bleeding.

5. Once the blood collection is completed, reverse the sampler and shake it evenly for 5 times; Place for observation.

6. Place the disposable vacuum blood collection container in the special recycling appliance after use.

Storage requirements

Store in a dry, well-ventilated and clean room with no corrosive gas and relative humidity above 80%

matters needing attention

1. This product is disposable;

2. If it is found that the tube body is damaged or the plug is loose, it is prohibited to use it;

3. The vacuum sampling vessel containing anticoagulant should be mixed 5-8 times reversed after blood collection to ensure the complete fusion of anticoagulant and blood sample;

4. The vacuum sampling vessel containing coagulant or separation gel is placed upright after blood collection, and the serum is separated by centrifugation after the blood is completely coagulated.

5. For high altitude areas, please use special vacuum sampling vessels for high altitude areas;

6. The product should be used in accordance with the relevant operating specifications of the medical department, and is only used by trained medical personnel.

Company Profile