Lock Channel Zigzag Wiggle Wire for Agricultrue Greenhouse Film Lock

Product Description

Greenhouse card slot is one of the main accessories of greenhouse solid film. Greenhouse card slot and greenhouse film spring are used as special tools for solar greenhouse, plastic single-layer greenhouse, plastic multi-layer greenhouse, plastic vegetable greenhouse and fixed film. Internal angle design, combined with self-locking function, can make the film stable in the greenhouse in strong wind season.

1. The groove depth is about 11mm, and the film, insect net, sunshade net, etc. can be stuck in the double-layer spring at the same time.
2. The slot width is 30mm, about 2mm wider than the ordinary card slot.
3. The length is 2M and 4m respectively. Please contact us for freight and payment terms.
4. The material is cut and pressed by hot-dip galvanized steel, and the zinc content is customized according to the greenhouse industry standard. It is normally used for about 10 years.

Pay Attention To

1. Check the connection of various clamps frequently. When the wedge is loose, it should be tightened immediately and fixed again. If the film is damaged, it should be replaced or glued in time.
2. In case of strong wind, all ventilation holes shall be closed in time, and the pressure film pipeline shall be tightened. When snowing, remove the snow in time to prevent overloading. If necessary, you can add some temporary supports to support the middle of the arch pipe. In case of disastrous weather, someone must take care of the greenhouse.
3. If all kinds of clamps fall off, are damaged or lost, please contact the manufacturer in time to purchase accessories. Be sure to fill in the name and number of the schedule when purchasing.
4. After the greenhouse does not need to be removed, all parts shall be cleaned by classification. Store in dry and ventilated place to prevent corrosion and deformation from affecting service life.