Blank Distribution Tubing Hose DIY Garden Drip Plant Irrigation System

Product Description

Polypropylene faucet connector
1 / 4 "hose quick connect
HQ PVC flexible hose
HQ PP 1 / 4 "barb tee
8 hole drop
Adapted water droplets
8 hole drop
Adjust to intermediate flow

Advantage

Automatic irrigation
Equipped with timer, you can water at the time you need, don't worry about forgetting to water.

Support manual watering
You can wash the car or water it manually.

Easy to use

Easy to install, flexible to remove, can be installed on most faucets.

Installation steps

Step 1 – connect the adapter
Step 2 - connect the hose
Step 3 - good connection
Step 4 - cut off hose as required
Step 5 - contact tee
Step 6 - contact tee

Step 7 - contact the dripper
Step 8 - Fixed house

Step 9- install well

Step 10 irrigation
Step 11 work

Why To Leak?

Cause of water leakage:

The size of some faucets is too small, and excessive tightening will cause deformation of the rubber ring and leaks due to gaps.The surface of some faucets is too smooth and the universal acceptance force will fall down when the water pressure is large, resulting in water leakage.

Solution: The surface of the old-fashioned unthreaded faucet is smooth. You need to wrap enough raw materials on the faucet, and then put on the universal joint.

The water outlet of the washing machine's standard water tap is too thin, and a 4-point standard interface must be directly applied (the original connector must be removed first, and a raw material belt is recommended)

Leak 2: Leak between timer nipple and quick connector

Cause of water leakage:

The pacifier of the timer does not completely match the joint of the quick joint, and it is not completely locked, which causes water leakage.

Solution:

Push down the quick connector activity buckle firmly, then fasten it up with the timer pacifier, and release it with a click.

The seam between the two is only about 1 mm after being connected, and about 5 mm after incorrect installation.