Industrial Concealed Commercial Crawlspace Wall Ceiling Mount Duct Dehumidifier For Greenhouse
Article No: CFD5.0D
APPLICATION SCOPE
The unit is configured with a high and low voltage protection, anti-freeze protection, current overload protection device, and a number of operating and fault display function, safe and stable operation. Heat exchanger carefully manufactured by the import processing equipment, high heat transfer efficiency, compact structure, thus running low vibration, low noise, the dehumidification large, low failure rate, long service life, suitable for small-area plant warehouse, family, office space, laboratory room,computer room .
After opening the dehumidifier, it should be kept in standby state as far as possible, and do not open and close frequently, so as to greatly
reduce the damage to the machine performance and not waste a lot of electricity.After power failure, it is necessary to turn off the power
immediately to prevent the sudden power call and the sudden impact of large current on the dehumidifier and damage the dehumidifier.
PARAMETER
Humidity removal | 5L/H |
Voltage | 220V~50Hz |
Power | 1300W |
Air circulation | 600m3/h |
Refrigerant | R22 |
Wind in/out method | front,back |
Net weight | 59Kg |
Applying space | 130-150m2 |
dehumidification efficiency will be relatively low.Therefore, it is necessary to stand the dehumidifier for a period of time, so that the refrigerant in the compressor can be reflux in place before it is used.
After opening the dehumidifier, it should be kept in standby state as far as possible, and do not open and close frequently, so as to greatly reduce the damage to the machine performance and not waste a lot of electricity.After power failure, it is necessary to turn off the power immediately to prevent the sudden power call and the sudden impact of large current on the dehumidifier and damage the dehumidifier.
In terms of placement, it is recommended to place the dehumidifier in a place with air circulation and flat ground, and put it next to the wall.In this way, the moist air is pumped into the dehumidifier as soon as possible, and the dry air can be quickly circulated to all corners of the workshop to achieve better dehumidification effect.