Two Ways 12/10mm HDPE Air Blown Fiber Microduct Orange Sheath For FTTH Application

Features

Microduct assemblies are available for several installation environments such as direct buried installation, into existing pipes or for indoor installation. Microducts are characterised by heavy wall microducts and a relatively thin outer sheath. The thickness of each inner tube allows individual tubes to be used direct bury solution. The microducts themselves are rugged enough to protect the fiber cables inside. Micro ducts are made of HDPE and have a low friction inner surface for best blowing performance.

Features

Robust, highly resistant to crushing
Simple line of connectivity products
Designed for slots and micro-trenches
Nominal sheath thickness is 1.0mm

Technical specification:

Inner micro duct: 12/10mm

Outer diamter: 27.4*15.4mm (±1.1mm)

Thickness of sheath: 1.7mm (±0.2mm)

Remarks: Ripcord optional

Raw material:

HDPE of a high-molecular type with the following parameters is used for production of the Tube Bundle:

• Melt flow index: 0.1 ～ 0.4 g/10 minutes EN ISO 1133

(190 °C, 2.16 KG)

• Density: Min. 0.940 g/cm3 ISO 1183
• Tensile strength at yield: Min. 20MPa ISO 527
• Elongation at the break: Min 350% ISO 527
• Environmental stress crack resist (F50) Min. 96 hours ISO 4599

Structure:



Storage:

Completed packages of the HDPE microduct on drums can be stored outdoor Max. 12 months upon the date of production.

Storage temperature: -40℃ to +70℃

Installation temperature: -20℃ to +50℃

Operating temperature: -40℃ to +70℃

Standard drum length

2000m/drum

Text print: (Support customized text)

HUIYUAN MICRODUCT 2WAY HDPE 12/10 [Month-Year] [Meter marking]

Factory & office

Production line