12WAY 5/3.5mm HDPE Air Blown Fiber Microduct for Fiber Optic Cable Installation

Features

HDPE Direct Buried Microduct is an ultra tough microduct for routing cables and optical fibres underground. HDPE Direct Buried Microduct is suitable for direct bury deployment thanks to the special polymer it is constructed from and is available with a tone-wire if required for locating purposes.
HDPE Direct Buried Microduct has a ultra low-friction & low static lining to assist in pulling, blowing and pushing of fibre or cable.

Features

Microduct is made from High Density Polyethylene for protection of Fiber Optic cables.
Co-extruded with an internal low friction lining to facilitate the installation & can also be with a pull string to avoid friction damages.
Revitialize existing networks with over-rides.
Faster & easier installation utilize space in an occupied duct.
Substantially reduce construction cost and development time.

Technical specification:

Raw material:

HDPE of a high-molecular type with the following parameters is used for production of the Tube Bundle:

• Melt flow index: 0.1 ～ 0.4 g/10 minutes EN ISO 1133

(190 °C, 2.16 KG)

• Density: Min. 0.940 g/cm3 ISO 1183
• Tensile strength at yield: Min. 20MPa ISO 527
• Elongation at the break: Min 350% ISO 527
• Environmental stress crack resist (F50) Min. 96 hours ISO 4599

Structure:



Standard colors

Blue, Orange, Green, Brown & Gray

Test standards

Standard drum length

1500m/drum

Text print: (Support customized text)

HYOC MICRODUCT BUNDLE 12WAY HDPE 5/3.5 [Month-Year] [Meter marking]

Factory & office

Production line