FTTH Fibre to The Home 7WAY 5/3.5MM Air Blown Fiber Microduct Optical Networks

Introduction

Microducts and -assemblies are used for FTTx network extensions. There is a broad selection of tubes available for direct burial installation, in existing ducts, in air as well as for indoor applications.
Thick and thin walled microducts are available .
Thick walled microducts have a solid wall thickness that is enough to protect the optical fibers running inside of them. Typical dimensions for the thick walled microducts (OD/ID) are 7/3.5mm, 10/6mm, 12/8mm, 14/10mm and 16/12mm.
Thin walled microducts have lower wall thickness. Usually they are with one or more outer layers of protection that makes these ducts robust enough for the application. Typical dimensions of the thin walled micro tubes are (OD/ID) 3/2mm, 5/3.5mm, 10/8 and 12/10mm

Features & benefits

Size range of 5mm OD to 18 mm OD
Smooth or Ribbed interior lining
Revitalize existing networks with Overrides
MicroDucts can either be Direct Buried (DB) or installed in an existing conduit (DI)
Customize with color, stripe, print markings, and more
Available in HDPE, or fire retardant Riser, Plenum or LSZH materials

Technical specification:

Raw material:

HDPE of a high-molecular type with the following parameters is used for production of the Tube Bundle:

• Melt flow index: 0.1 ～ 0.4 g/10 minutes EN ISO 1133

(190 °C, 2.16 KG)

• Density: Min. 0.940 g/cm3 ISO 1183
• Tensile strength at yield: Min. 20MPa ISO 527
• Elongation at the break: Min 350% ISO 527
• Environmental stress crack resist (F50) Min. 96 hours ISO 4599

Structure:

Test standards

Standard drum length

2000m/drum

Text print: (Support customized text)

HYOC MICRODUCT BUNDLE 7WAY HDPE 5/3.5 [Month-Year] [Meter marking]

Factory & office

Production line