7 Ways 12/10mm HDPE Air Blown Fiber Microduct for fiber optic cable installation

Features

Air blown fiber microduct system is designed for modular construction of optical networks - a cost effective solution for urban areas, energy, industrial and commercial zones. The complete modular system consists of microcables blown into microduct bundle connected by passive components. The system can be placed both outdoors and indoors. With this system, you can save cost on upgrading the system in future by optical fiber cable blowing out & blowing in.

Features & benefits

Suitable for direct bury & direct installation
The bundle could be combined with 2 to 24 microducts
Easy installion & cost effective
Applicable in FTTH & backbone construction
LSZH material optional in indoor application

Technical specification:

Inner microduct: 12/10mm

Bundle diamter: 39.4mm (±1.1mm)

Jacket thickness: 1.7mm (±0.2mm)

Weight: 432kg/km

Max tensile strength: 4200N

Min bending radius: 800mm

Remarks: Ripcord optional

Raw material:

HDPE of a high-molecular type with the following parameters is used for production of the Tube Bundle:

• Melt flow index: 0.1 ～ 0.4 g/10 minutes EN ISO 1133

(190 °C, 2.16 KG)

• Density: Min. 0.940 g/cm3 ISO 1183
• Tensile strength at yield: Min. 20MPa ISO 527
• Elongation at the break: Min 350% ISO 527
• Environmental stress crack resist (F50) Min. 96 hours ISO 4599

Structure:



Standard colors

Blue, Orange, Green, Brown & Gray

Test standards

Tensile Strength IEC 60794-1-2 Method E1
Bend IEC 60794-1-2 Method E11
Kink IEC 60794-1-2 Method E10
Impact IEC 60794-1-2 Method E4
Crush IEC 60794-1-2 Method E3

Standard drum length

1500m/drum

Text print: (Support customized text)

HYOC MICRODUCT BUNDLE 7WAY HDPE 12/10 [Month-Year] [Meter marking]

Factory & office

Production line