Cable Side Exiting Adjustable Cable Grippers With M10 External Thread

Adjustable Cable Grippers prove very easy to use, they have a unique clutch braking

mechanism that grips within the gripper, thus creating a very easy, practical, simple

system that can be used time-and-time again!

Advantages:

1. Adjustable Cable Grippers make installation quick and easy

2. Adjustable Cable Grippers can be infinitely adjusted

3. Adjustable Cable Grippers can be used to suspend signage, Lighting Systems etc

Description

A Gripper is a sophisticated piece of hardware that allows an electrician to adjust the height of a fixture without utilizing tools. As a cable slides through the gripper a plunger and three balls within the gripper surround the outside diameter and catch the cable as it passes through the gripper. When mounted and weight is applied to the gripper, the tension forces the balls to grab the cable in a pinching movement.

We offers several grippers in different diameters and screw sizes.

Grippers can be used in many mounting applications including but not limited to j-box, drop ceiling, masonry and unistrut projects. They can be repositioned without damaging the cable and no tools are necessary. Just unscrew the head, push and slide it.One hand is sufficient : the grippers are installed wholly without tools and are infinitely adjustable

What is A Gripper?

A Cable Gripper is an adjustable fastener that automatically grips and locks to any position on an aircraft cable using an internal, spring-loaded 3-ball gripping mechanism. This allows the Gripper to move freely up the cable but not down unless the mechanism is released.

Do I need tools to adjustable the Gripper?

No, the Gripper mechanism is released by pressing the plunger manually.

Do I need a Safety Nut?

Most Grippers have optional “safety nuts” or “safety caps” to lock the mechanism off in both directions.

Are locknuts provided with Grippers?

Generally no, but Grippers with metric threads are supplied with a corresponding bolt or lock nut.

What components do I need to hang my fixtures?

You will need a ceiling attachment (cable coupler or connector), a cable with a terminal (stop sleeve) and a Cable Gripper, normally placed at the fixture. You may also need ceiling canopies and power cord.