Clean Room Touch Screen Particle counter
Whether you're certifying your cleanroom to ISO standards, performing routine testing, counting particles in your compressed gas lines, challenge testing your HEPA filters or measuring environmental parameters such as TRH, DP, or AV, the Y09-310NW particle counter is the right instrument to get the job done.
The specification of portable particle counter
Outside Dim | 245*268*160 (mm3); (Wide*Deep*High) |
Display | 7 inch touch screen |
Weight | 3.5Kg |
Max. Consumption | 80W |
Power Source | DC16.8V built-in Lithium Battery; AC 220V ± 10% |
Size Channels | 0.3, 0.5, 1, 3, 5, 10 μm |
Calculation | 95% UCL calculation, can display and print particle concentration (particles / cubic meter, particles /cubic feet) |
Flow Rate | 28.3L/min (Imported Pump) |
Sample Time | 6s---999999s (Selectable) |
Cycles | 0-99 |
Hold Time | 0-9999s |
Delay Time | 5-999s |
Zero Court | <=10min |
Location | 1-99 |
Alarm | ISO Class |
Printer | Built-in Thermal Printer |
Data Storage | 20000Samples /300 Samples of UCL (With PC Software) |
Light Source | Laser Diode (30,000 hours Mean Time Between Failures) |
Counting efficiency | 50% @ 0.3μm and 100% for particles >0.45μm (ISO21501) |
Maximum Rated Particle Concentration | 35000 particles/L |
Operating Time | More than 5.5 hours |
Environmental Temperature | Temperature :10 -35℃; Humidity:20%-75%RH; Atmosphere Pressure:86Kpa-106Kpa |
Features of air particle counter
1. Sample volume 28.3 LPM (1.0CFM).
2. Simultaneously display of up to six particle sizes
3. 20000-record data storage memory
4. Meet the requirements of ISO14644-1:2015
5.Built-in Thermal Printer
6.Low power display
SUJING