Power Coated Steel HEPA Fan Filter Unit For Clean Room And Pharmacy 220V / 50HZ
K-ling Fan Filter Units include a 99.99% efficient HEPA filter, 30% ASHRAE pleated type prefilter, seismic clip suspension points, safety switch which disables the unit while servicing, and solid state variable speed control with RFI suppression, allowing the airflow to be fine tuned.
The energy efficient N310 motor blower is a low watt backward curved impeller, single phase, permanent split capacitor type motor blower assembly with thermal overload protection. Units are available in 115 Volt (60 Hz), 208-230 Volt (50/60 Hz) (Upon Request) and 277 Volt (60 Hz).
Housings are fabricated from steel with a white powder coat finish and include seismic clip suspension points. Final filters are protected with a white epoxy diamond pattern grille and are tested according to accepted procedures as described by the Institute of Environmental Sciences (IEST) and/or ISO standards.
The HEPA Filters are designed for 90 FPM average face velocity @ initial 0.47 w.g. and have a rated efficiency of 99.99% @ 0.3 micron or larger. A 99.9995% eff. ULPA filter is available as an option. An anodized aluminum frame holds the 53mm media which is protected by a diamond pattern white epoxy coated steel grille. Final filters can be replaced by removing unit from ceiling.
Introduction:
Technical Parameter:
MODEL | KEL-FFU1225S | |
External size (mm) | 1225X1225X350mm | |
Material | Steel plate with painting/galvanized steel/aluminum/stainless steel | |
Air flow(m3/h) | 2400m3/h | |
Air velocity (m/s) | 0.3/0.35/0.4/0.45/0.5m/s | |
Pressure(pa) | 97(10mmAq) | |
Control system | 1: Power on/off 2: Control air speed up/down | |
HEPA FILTER | Size(mm) | 1220x1220x69mm |
Efficiency(%) | 99.995% @ 0.3um | |
Pressure (pa) | <220pa @ 0.45m/s | |
Power supply | 220V/110V ,50/60HZ | |
Power (w) | 172Wx2pcs | |
Noise (Db) | 57db |
Customer’s design is available.