Aluminium Frame H13 Deep pleats HEPA Filter, Glass Fiber Midea For Industry
The Deep pleats HEPA Filter normally used for final filtration applications in clean rooms, computer suites, asbsestos removal areas, hospital
operating theatres and any site requiring ultra clean conditions.
Construction:
The filter media is a water repellent pleated micro-glass fibre paper, each pleat is separated either by a kraft
paper or aluminium separator.
The completed pleat pack is then bonded into a frame which may be of high density particle board, galvanised
mild steel, stainless steel or aluminium. Neoprene gaskets may be fitted to either or both filter faces.
By extending the surface area it is possible to increase the flow rate for a given size of filter. Approximately
twice the flow rate may be achieved through the same size of HEPA filter by extending the surface area - this
is accompanied by a slight increase is pressure drop.
Face grilles are available as an option.
The deep pleated box style filters with aluminium separators.
It is made from micro - fine fiberglass paper media and comes with metal frames.
Filters are available in H12, H13 and H14 efficiencies.
Specification:
Customer Size is Available.
Nominal Size | Actually Size | Thickness | Screen | Rate air flow | Face Velocity | Rate Primary Resistance |
(feet)(W*H*D) | (mm)(W*H*D) | (mm) | (m3/h) | (m/s) | (Pa) | |
H13 :108pa H14: 115Pa U15: 135Pa U16:148Pa | ||||||
4x2 | 1170x570 | 50 | Both side | 775 | 0.35 | |
2x1 | 610x305 | 50 | Both side | 200 | 0.35 | |
2x2 | 610x610 | 50 | Both side | 423 | 0.35 | |
2.5x2 | 762x610 | 50 | Both side | 535 | 0.35 | |
3x2 | 915x610 | 50 | Both side | 646 | 0.35 | |
4x3 | 1170x870 | 50 | Both side | 1206 | 0.35 | |
4x4 | 1170x1170 | 50 | Both side | 1637 | 0.35 | |
2x2 | 570x570 | 70 | Both side | 472 | 0.45 | H13 :100pa H14: 110Pa U15: 120Pa U16:140Pa |
4x2 | 1170x570 | 70 | Both side | 1000 | 0.45 | |
2x1 | 610x305 | 70 | Both side | 258 | 0.45 | |
2x2 | 610x610 | 70 | Both side | 545 | 0.45 | |
2.5x2 | 762x610 | 70 | Both side | 687 | 0.45 | |
3x2 | 915x610 | 70 | Both side | 831 | 0.45 | |
4x3 | 1170x870 | 70 | Both side | 1550 | 0.45 | |
4x4 | 1170x1170 | 70 | Both side | 2100 | 0.45 | |
2x2 | 570x570 | 90 | Both side | 472 | 0.45 | H13 :75pa H14: 80Pa U15: 90Pa U16:110Pa |
4x2 | 1170x570 | 90 | Both side | 1000 | 0.45 | |
2x1 | 610x305 | 90 | Both side | 258 | 0.45 | |
2x2 | 610x610 | 90 | Both side | 545 | 0.45 | |
2.5x2 | 762x610 | 90 | Both side | 687 | 0.45 | |
3x2 | 915x610 | 90 | Both side | 831 | 0.45 | |
4x3 | 1170x870 | 90 | Both side | 1550 | 0.45 | |
4x4 | 1170x1170 | 90 | Both side | 2100 | 0.45 | |
2x2 | 570x570 | 110 | Both side | 472 | 0.45 | H13 :60pa
|
4x2 | 1170x570 | 110 | Both side | 1000 | 0.45 | |
2x1 | 610x305 | 110 | Both side | 258 | 0.45 | |
2x2 | 610x610 | 110 | Both side | 545 | 0.45 | |
2.5x2 | 762x610 | 110 | Both side | 687 | 0.45 | |
3x2 | 915x610 | 110 | Both side | 831 | 0.45 | |
4x3 | 1170x870 | 110 | Both side | 1550 | 0.45 | |
4x4 | 1170x1170 | 110 | Both side | 2100 | 0.45 |