Lightweight Clean Room Ultra Thin Box Fan Filter Unit/ FFU With HEPA Filter
Introduction
FFU fan filter unit is mainly used for purify the air into the clean area to make sure it can reach requirement cleanliness class,
Uniform air wind blow out at a speed of 0.45m/s with adjustable speed ±20%..
FFU Fan Filter Unit which draws in contaminated air from the top of the module, and exhausts filtered clean air vertically in a unidirectional (laminar) air stream at its base, is a self-contained fan and filter module for cleanroom applications.
Features:
1. Low energy consumption, high performance, low operating cost
2. Perfect structure, low height, uniform wind speed
Scientific air duct design, low resistance, low noise, effectively save the space of technical interlayer.
3. different size available ,adapt to a variety of GRID system; Be able to timely respond to customer's change of external box material, special power supply or fan configuration;
4. Safe and humanized design
Can walk high strength box, to ensure the safety of installation or maintenance personnel, can be remote monitoring and adjustment, easy to operate;
5. Multiple safety protection devices
Equipped with overcurrent relay, motor protection device, fault display lamp, fault signal circuit, and can be installed temperature protector, fuse, motor circuit breaker, etc.
Parameter
Fan Filter Unit | ||||
Model | KEL – FFU920 | KEL – FFU1175 | KEL – FFU1225 | |
External size: (W*D*H)mm | 920X615X350 | 1175X575X350 | 1225X615X350 | |
Air Flow | 900m3/h | 1000m3/h | 1200m3/h | |
Construction | Stainless steel 304/aluminum/galvanized steel/steel with power coated | |||
Air Velocity | 0.3 / 0.35 / 0.4 / 0.45 / 0.5 / 0.6 m/s | |||
Control system |
| |||
Pressure (pa) | 97 (10mm)Aq | |||
Hepa Filter | Size(mm) | 915X610X69 | 1170X570X69 | 1220X610X69 |
Efficiency | 99.99% @0.3um | |||
Pressure | 180pa @0.45m/s | |||
Power supply | 220/110V 50/60HZ | |||
Fan power | 123W | 123W | 175W | |
Noise | 52dB | 52dB | 52dB |
Display