PLC Clean Room Air Shower Pass-Thru With Auto Conveyor Line For High-tech Manufacturing

Quickly detail:

Extenal size : 980x800x2250mm

Internal Size: 600x600x600mm

Filtration step : 2 step

HEPA filter efficiency: 99.999%@0.3um

Control system: PLC Control system

Blower way: three size blowing

Air speed :>25m/s

Power: 380V/50HZ

Introduction:

The PLC cleanroom Air Shower Pass -thru with Conveyor Line is an integrated contamination-control solution designed for automated material transfer between clean and non-clean zones in industries

Applications:

It is widely used in the clean environment,.such as pharmaceuticals, food processing, and electronics manufacturing. Combining HEPA filtration and PLC automation, it ensures efficient decontamination and seamless logistic



Technical Parameter:

Customer’s design is available.

Control Programe :

1: Exit is automatic slid door(up/down), entrance door is normally manual door

2: after the goods entrance the cabinet closed the entrance door,

the air clean system will be working 15s.meanwhile the two door interlock.

3:15s later, the exit door will be open automatic, and the conveyor system will be move on. When the goods

pass the photo-electrics sensor that will be give single to the back door for close. (the part1 and part 2

should be together start and stop)

4: Three side with blow. 1 Sets ion anti-static device.

5: Emergency button help you out of suddenly trouble

Part1: Technology Illustration:

1: Major Structure and frame: Aluminum profile (50x50mm)

2: Belt: Anti-static PVC belt green color

3: Height: 700-1000mm adjustable

4: Motor: 0.4kw 380V/ 50HZ.

5: Speed: 1-15m/min (adjustable)

Part2: Technology Illustration:

1: Major Structure: steel with power coated plated

2: Frame: steel with power coated square cube. 40mmx40mmx1.5T

3: Belt: Anti-static PVC belt green color

4: Motor: 380V/50HZ.

5: Speed: 1-15m/min adjustable

Warranty:

Our equipment is warranty for 1 year excluding consumable parts and accessories.
All equipment is shipped with a comprehensive use’s manual complete with a report documenting all test procedures.
Additional IO/OQ/GMP document is available upon request.
Contact our sales representative for specific warranty details or document request.


Consumable parts illustration:

1: Pre-filter: each one should be replacement in each 6 month, but it can refresh no more three times.

2: HEPA filter: each one should be replacement in each half and one years.




Punctual delivery time:

• Production / inspection report provide before shipment
• Shipping notice or insurance for you when your goods is shipped.
After sales service:
• We respect your feed back after receive the goods.
• We provide one year warranty after goods arrive.
• We promise all spare parts available in lifetime use.
• We care of your complain within 48hours.