Air Suspension Compressor pump For Mercedes Benz W222 Airmatic S Class Air Pump S400 S500 S550 S600 S63 S65 AMG A0993200104 2223200604 0993200104

Product Detail

Application

Compatible with Mercedes-Benz 2016-2018 S63 AMG
Compatible with Mercedes-Benz 2015-2018 S65 AMG
Compatible with Mercedes-Benz 2014-2017 S600/S500/S400/S400L/S500L/S550e
Compatible with Mercedes-Benz 2018 S450/S560

Air Suspension System Components
Early versions of air suspension systems were relatively simple. Air bags replaced the coil springs. The bag was inflated to the correct pressure or height with an outside compressor through a valve on the bag. Changes in technology and use added more components, and control, to the system. But today's air suspension systems all have a basic stock of similar components that vary little from maker to maker. The differences come mainly in controls and ease of installation.
Air bag material has changed little over time. The bag is a composite of rubber and polyurethane, which provides structural integrity, air-tight construction, toughness against light abrasion from road debris and sand, and resistance to salt and chemical corrosion.
The bags come in three basic shapes:
Double-convoluted bag. This bag is shaped like an hourglass. The design allows for a little more lateral flexibility than the other designs.
Tapered sleeve. This air bag performs the same as any other but is designed to fit in a tighter area and offers a little more adjustability on ride height.
Rolling sleeve. This is also a specific-application air bag. The pertinent differences between the two sleeves are really about ride height and spring control, and what's best for the vehicle and the application.
Most air suspension systems now come with an on-board compressor. The compressor is an electric pump feeding air to the bags through a series of compressed air lines. The compressor is generally mounted on the vehicle's frame, or in the trunk. The vast majority of compressors come with an attached drier. The compressor works by drawing outside air into the pump, compressing it and moving it to the bags. Outside air is often laden with moisture, and moisture can wreak havoc in a closed system. The drier uses a substance known as a desiccant to absorb as much moisture from the air as possible before the air is sent through the system.
Simpler compressor systems rely on the compressor itself to maintain, increase or decrease pressure. More advanced systems add an air tank to maintain pressure and provide an even transition between pressures. Compressors can be activated manually or automatically, and controlled solely by the driver, automatically through an electronic system, or a combination of both.

The air supply
The air supply system consists of the engine air compressor, the air tanks, air valves and air lines. The engine air compressor supplies air for all the air equipment on the vehicle. The pressure delivered by the compressor varies. For several years, the air supply was maintained around 120 to 125 psi but on some new vehicles this has been improved to 135 psi. Dash gauges are present that will supply system pressure information but all vehicles have what we say to as a “pop off valve”. You can get the valve “pop off” when the system reaches the maximum air pressure.

Air Compressor Use For

Air compressors can be grouped into three classifications: consumer-grade, professional-grade and industrial-grade.

1.Consumer-grade air compressors can be described as a pancake or single-stage model. They’re used for household tasks like inflating tires and inflatable products and possibly some low-load air tools like staplers and brad guns.
2.Professional-grade air compressors provide more power and higher pressurized air. They could be two-stage reciprocating models or rotary screw models and can provide more power to run several air tools at once with intermittent use.
3.Industrial-grade air compressors will be the workhorse of a manufacturing plant or the reliable power source on an oil rig. They are designed to provide a steady flow of compressed air for long periods of time and can take fluctuating surges in use typical in major manufacturing plants. These compressors are built with high-quality components that allow for customization to the specific environment to improve performance, energy efficiency and reliability.

What is an air suspension system?
Air suspension systems essentially replace a vehicle's coil springs with air springs. By adding in an on-board air compressor, sensors and electronic controls, today's air suspension systems provide several advantages over all-metal, conventional springs, including near-instant tuning, and the ability to adapt handling to different situations and vary load capability.

Warranty:
1. 12 month warranty
2. 100% quality testing before shipping.We will provide you excellent customer service and 100% satisfaction warranty.

Note:
1.All items in our store will provide logistics tracking numbers.
2.If you have any questions about the product, please contact us, we will try our best to solve your problem.
3.This Brand New after market air suspension compressor is made of high quality components
4.Replaces the original air compressor of your car and equal the original quality
5.Please double confirm the compatibility as well as the OEM number before purchasing.
6.Instruction is not included. Professional installation is recommended

FAQ

Advantage

1. We are top 3 of professional Auto Parts manufacturer in China.
2.Advantageous in Air Suspension Shock Absorbers, Air Compressor Pump etc..
3. Our all of our products are with high quality and competitive price.
4. Our factory had been focusing on Auto Parts Business over 11 years.
5.Our products list suitable for Benz, Audi, BMW, Land Rover, Volkswagen, Porsche, Bentley, Jaguar, GMC, Jeep, Rolls-Royce, Compressor etc.
6. OEM and ODM are available
7. Monthly Production capacity is 5000pcs.
8. If order quantity is large, then price can be negotiated
9.Most of our products are exported. Europe, Middle East, Northern Europe, Eastern Europe and North America are our mainly markets. Southeast Asia, Asia Market Also available.

10. 100% Brand New for all of our products.

OEM/ODM Service:

- If you want to show your own brand LOGO on the goods such as cable, package bag, label or any where. Our OEM and ODM service is always ready to do it. Please contact with our sales team to get best support.

Packing:
- According to Standard Export Packing.
- Carton box, wooden box, wooden pallet.

Shipping:
- International express such as UPS, TNT, DHL, etc
- International air: CA, AA, EA, etc
- By sea
- Standard export sea port: Huangpu, Hongkong, Shunde
- Standard export airport: Shenzhen, Hongkong, Guangzhou